365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com

Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: GE Oven  (Read 3153 times)

Offline jjbrop

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 2
GE Oven
« on: November 30, 2009, 10:25:48 PM »
Oven lock light will generally not go off, and oven will not operate.  When I get the oven lock light to go off, and then start to bake something the oven will quite during the baking process and the oven lock light comes on.  Ge wall Oven


Model JTP20B0F7BB

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Oven
« Reply #1 on: December 01, 2009, 07:13:06 AM »
All this is caused by an internal failure of the door latch assembly. Underneath that round motor is a plastic cam which trips the lock light and the oven circuits. This is the weak point in the assembly and a source of failure.  GE has made improvements on this part and the new kit is shown below for you to purchase. A very simple plug-and-play part...

« Last Edit: December 01, 2009, 07:15:14 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com


Frigidaire oven temp sensor probe?

Started by jon

Replies: 1
Views: 8804
Last post July 08, 2007, 06:06:26 PM
by AJ
Jenn-Air self cleaning oven problem

Started by ralphthedog

Replies: 6
Views: 13753
Last post December 13, 2007, 08:15:34 PM
by ralphthedog
How can I find the manual for a Jenn Aire double oven?

Started by Dukes

Replies: 2
Views: 4842
Last post December 16, 2007, 04:40:06 PM
by Dukes
Maytag Double Wall oven lights

Started by jumptrout51

Replies: 2
Views: 5970
Last post December 23, 2007, 01:26:06 PM
by kjagmin
bosch convection oven

Started by JPG

Replies: 1
Views: 4759
Last post December 20, 2007, 09:19:33 AM
by Pegi
bosch oven doors

Started by JPG

Replies: 3
Views: 4469
Last post December 23, 2007, 09:24:56 PM
by BrntToast