Author Topic: Ice Chute flapper door  (Read 1845 times)

Offline Patrick

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 1
Ice Chute flapper door
« on: November 21, 2009, 12:26:32 PM »
I have purchased a new ice door flapper, the round black rubber door that lets ice out of the ice maker.  My question is how do I get to this part, the trim around the outside of the dispenser seems to go under the stainless steel skin, do I need to remove the SS cover on the door to get to this flapper?
I don't see any other way of gaining access to this flapper to replace it.
Please help

Patrick

Model ZISS480DRAQS

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1188
Re: Ice Chute flapper door
« Reply #1 on: November 25, 2009, 11:23:46 PM »
Yes you have to remove the trim or cover to get at it. I put tape around the trim and pull it out with a putty knife.Some of the new finishes will mark very easy.

 

ice chute flapper door

Started by repairguy42

Replies: 5
Views: 2353
Last post July 14, 2011, 08:52:41 PM
by niobrara
Kenmore refrigerator flapper door

Started by Bailey

Replies: 6
Views: 1326
Last post April 26, 2013, 09:16:16 AM
by Bailey
GSS25XSRDSS Dispensor Door Flapper Staying Open

Started by FIXFRIG

Replies: 0
Views: 108
Last post December 04, 2014, 09:28:19 AM
by FIXFRIG
Video: Whirlpool In-Door Ice Maker Fill Cycle

Started by AJ

Replies: 3
Views: 10141
Last post September 23, 2008, 05:37:19 PM
by Al Capone
maytag refrigerator door seal

Started by mvnative

Replies: 12
Views: 10290
Last post March 10, 2008, 10:58:43 PM
by mvnative
Amana Refrigerator Door Clip Part Needed

Started by Dave

Replies: 0
Views: 2798
Last post March 27, 2008, 08:59:44 AM
by Dave