Author Topic: kenmore series 70  (Read 3692 times)

Offline hossfly

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 2
kenmore series 70
« on: November 21, 2009, 11:16:10 AM »
My washer will not drain or spin. It will fill and agitate but when it hits the spin cycle it stops right there. It will not drain or spin. Any ideas?

Model 110.92573200
« Last Edit: November 21, 2009, 12:04:53 PM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: kenmore series 70
« Reply #1 on: November 21, 2009, 11:46:41 AM »
Hi hossfly,

What is the full model number of your washer. Your Sears/Kenmore washer model number starts with 110 and ends with eight more digits.

For example 110.12345678

The full model number can be found on the model/serial number tag that is located on the washer.

Check picture below for possible model number tag locations:





I removed your other post as there is no reason to double post about the same appliance with the same problem.

Thanks for posting your questions.



RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline hossfly

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 2
Re: kenmore series 70
« Reply #2 on: November 21, 2009, 11:51:03 AM »
Sir,

The rest of the number is 110.92573200
« Last Edit: November 21, 2009, 12:05:16 PM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: kenmore series 70
« Reply #3 on: November 21, 2009, 12:05:55 PM »
I edited the topic to include the correct model number information, thanks!
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: kenmore series 70
« Reply #4 on: November 21, 2009, 12:10:34 PM »
Hi,

Sounds like you have a bad lid switch. This is a very common problem.

As you open and close the lid can you hear the lid switch click on and off?

If not chances are the lid switch is bad and needs to be replaced.

If you have a ohm meter and know how to use it you could also ohm the lid switch out to check it.

I looked up the lid switch for your model washer and it uses lid switch part number: 285671 Lid Switch Assembly, AP3094500





« Last Edit: November 21, 2009, 12:12:32 PM by whirlpooltech »

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: kenmore series 70
« Reply #5 on: November 21, 2009, 12:42:50 PM »
http://appliancejunk.com/forums/index.php?topic=5191.0

How to remove the cabinet to access your parts.
Take a Kid fishing.

 

Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 5640
Last post October 25, 2007, 09:46:52 AM
by Pegi
Kenmore 90 Series - No agitation

Started by jastek

Replies: 24
Views: 9474
Last post February 23, 2008, 06:18:42 AM
by whirlpooltech
KENMORE WASHER 60 series

Started by amnesty

Replies: 7
Views: 13554
Last post March 06, 2008, 02:48:23 PM
by JWWebster
kenmore 80 series washer

Started by buddyray

Replies: 2
Views: 6429
Last post April 19, 2008, 06:01:05 PM
by RegUS_PatOff
Kenmore Series 80 coupling repair

Started by DFOK

Replies: 4
Views: 4192
Last post April 25, 2008, 07:21:30 PM
by JWWebster
Kenmore 80 series washer

Started by KenOH98

Replies: 16
Views: 24253
Last post January 01, 2009, 09:28:08 PM
by bal62958