GE top loader washer will not spin or agitate at all

[semiclueless]

Hi
I have a GE top loader model WHDSR316G0ww that will not spin or agiatate. It fills and drains and the timer advances. Tested and bypassed the lid switch and still nothing. Later I found that the in line fuse on the RW wire to the motor was bad so I ordered the new fuse installed it and it still will not spin or agitate. I keep seeing that I should check for the flashing LED for error codes, but I see no LED at all. I removed the drip cover from the motor and I see no LED anywhere on the circuit board. I am at my wits end! Please help!!!!

Model WHDSR316G0WW

[krazytech]

Try a reset your inverter unplug for 30 sec you should hear a click ... plug back in then with 10 sec open and close the lid 5 time then put into spin ...

You may have to try 3 or three time to get the timing right

the light led is on the inverter board and is green...

[semiclueless]

Have tried the reset but still nothing. And I still see no flashing light? I have replaced the inline fuse, but it dies not seem like the motor is working at all.

[krazytech]

do you have voltage after the fuse?

If you have voltage you may need a motor/inverter

the green LED is on the inverter board right hand side a little hard to see ...