Author Topic: All DISPLAY ON GE STOVE  (Read 3726 times)

Offline centralappliance

  • Technician
  • Member Since: Jul 2009
  • Posts: 76
  • Country: ca
All DISPLAY ON GE STOVE
« on: November 14, 2009, 08:57:04 AM »
Emergency call this morning. This GE stove not working. All segments on the display are on
Can someone help ASAP

Model GRSR3920TM-3

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 89
    • Repair control boards for home appliances
Re: All DISPLAY ON GE STOVE
« Reply #1 on: November 14, 2009, 09:03:35 AM »
I didn't have any success finding info with this model number, but I've seen this symptom a few times on GE oven boards. It's a problem on the ERC board itself - bad chip.
www.fixyourboard.com - We repair electronic control boards.

Offline centralappliance

  • Technician
  • Member Since: Jul 2009
  • Posts: 76
  • Country: ca
Re: All DISPLAY ON GE STOVE
« Reply #2 on: November 14, 2009, 09:11:13 AM »
I figured as much. Any idea what there worth??

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 89
    • Repair control boards for home appliances
Re: All DISPLAY ON GE STOVE
« Reply #3 on: November 14, 2009, 09:16:08 AM »
Can you verify the model #?  ... i find nothing starting with that sequence

Other option is to have us fix it ... can't say for sure if it's repairable until we see it, but most likely is (main issue is whether or not we have the chip).
www.fixyourboard.com - We repair electronic control boards.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: All DISPLAY ON GE STOVE
« Reply #4 on: November 14, 2009, 09:50:22 AM »
Can you verify the model #?  ... i find nothing starting with that sequence


It's a Canadian appliance. Do you have some way to look them up by model number?

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 89
    • Repair control boards for home appliances
Re: All DISPLAY ON GE STOVE
« Reply #5 on: November 14, 2009, 10:16:55 AM »
Normally yes, but I checked all my usual sources and didn't find this. Is there some way you can get the part no. from the controller, this may help, but it's hit and miss whether or not the controller has the actual part number on it.
www.fixyourboard.com - We repair electronic control boards.

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 89
    • Repair control boards for home appliances
Re: All DISPLAY ON GE STOVE
« Reply #6 on: November 14, 2009, 10:18:21 AM »
... also ... possibly the ge document number from the tech sheet might lead me there
www.fixyourboard.com - We repair electronic control boards.

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 357
Re: All DISPLAY ON GE STOVE
« Reply #7 on: November 14, 2009, 10:32:34 AM »

Offline centralappliance

  • Technician
  • Member Since: Jul 2009
  • Posts: 76
  • Country: ca
Re: All DISPLAY ON GE STOVE
« Reply #8 on: November 15, 2009, 06:44:47 AM »
Found out that thereis no replacement part available. Send it out for rebuild only $160

 

Maytag CRG9700BAL Gas Stove Display Panel Removal

Started by MisterEd

Replies: 5
Views: 3498
Last post November 07, 2010, 07:28:34 PM
by MisterEd
Stove no longer heats?

Started by tyler

Replies: 3
Views: 3108
Last post October 17, 2007, 12:32:26 PM
by tyler
Magic Chef gas stove question

Started by maypo52

Replies: 2
Views: 4753
Last post October 09, 2007, 07:12:57 AM
by maypo52
maytag propane stove

Started by mthd60sprty

Replies: 6
Views: 5468
Last post November 10, 2007, 01:25:38 PM
by maypo52
Need help with opening range top for gas stove to replace burner valve.

Started by bobafett13

Replies: 3
Views: 3702
Last post January 24, 2008, 10:57:06 AM
by JWWebster
GE Microwave No Display, No Operation

Started by TechnicianBrian

Replies: 0
Views: 4930
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian