I have a 14 month old model FDB4315LFC0
that I have had tons of problems with leaking front door seals at the bottom corners. Under warranty appliance serviceperson was able to fix by adding some additional seals. Well now 2 months out of warranty the pump
is contantly running when the door is shut. No error codes. Stops when you open the door. It appears to be running in the wash mode, but no indication in the LED display. I tried cycling power, drained all water from tub, pulled machine and checked for any other water. Nothing.
Well finally managed to find Frigidaire provides schematics and see the control board manages (lil xpensive) the pump. Not sure of any other reason it would be stuck in the "wash" mode. I am thinking I need a control board
(and I guess a gasket
), but based on my indications was hoping someone else may be of some help.
First post BTW
and thanks for any advice...