Free Service - Appliance Repair Help & Troubleshooting

Author Topic: VDSC36746SS 5 year old Viking Range Ignitor problem  (Read 18154 times)

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: 5 year old Viking Range Ignitor problem
« Reply #10 on: November 18, 2009, 09:00:38 PM »
Hi Dug
How did burner tool work BT-SBW. I have used a hose pliers. It leaves scratches on the brass... let me know should I sent the $20?
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline Dug

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 6
Re: 5 year old Viking Range Ignitor problem
« Reply #11 on: November 19, 2009, 09:01:30 AM »
Tool was worth it, no scratches very efficient. you could make one based on the picture. they added some rubber coating in a few places, like liquid electrical tape

The all viking parts rep said some individuals use a strap wrench which probably would work pretty well too.


A tip: the burner base was was stuck down, I used a plastic ID card (medical or library card) to slip between the pieces, worked easy and no scratches.


Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: 5 year old Viking Range Ignitor problem
« Reply #12 on: November 19, 2009, 11:33:33 PM »
thanks for the info Dug... I will have to get one..
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline JP509

  • VIP Member
  • Member Since: Jul 2016
  • Posts: 2
Re: VDSC36746SS 5 year old Viking Range Ignitor problem
« Reply #13 on: July 20, 2016, 02:49:52 PM »
I have the same problem for the same model Viking.  I can see the module located inside the range top but I do not have a service manual to show how to access it.  Since it is located between counters on the wall, I was hoping someone could share a manual or explain if it is accessed from the top by removing the burners etc or can I pull it out and access from a rear panel.   Based one what I could see through the small opening, I don't wee where there is clear access from the rear.   Any help would be greatly appreciated.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 3228
  • Country: us
Re: VDSC36746SS 5 year old Viking Range Ignitor problem
« Reply #14 on: July 20, 2016, 03:37:16 PM »

Offline JP509

  • VIP Member
  • Member Since: Jul 2016
  • Posts: 2
Re: VDSC36746SS 5 year old Viking Range Ignitor problem
« Reply #15 on: July 20, 2016, 06:00:27 PM »
See if you can use this manual.Page 21 https://drive.google.com/file/d/0B-i5KqMA2RZwNUJEM3VjRWNhVHM/view?usp=sharing

I could thank you.   Mine is a bit different and probably older.   I have a six burner and the module is not attached to the back but just sitting in the area under the burners.   Based on these pictures, I might be able to get to it from the back if the wires are long enough to pull it to that back hole.

 

Viking Dual Fuel Range

Started by TechnicianBrian

Replies: 0
Views: 3425
Last post April 04, 2008, 05:00:21 PM
by TechnicianBrian
Dual Fuel 30 inch Range from Viking

Started by TechnicianBrian

Replies: 1
Views: 5200
Last post July 16, 2008, 08:32:43 PM
by JWWebster
RS2466CW1 Display on viking range

Started by 66carlos66

Replies: 3
Views: 3881
Last post August 20, 2008, 06:30:22 AM
by Repair-man
VGIC366-6B Viking cooktop ignitor

Started by shoelesst

Replies: 5
Views: 4584
Last post December 16, 2008, 08:26:05 PM
by JWWebster
74008064 Maytag Jenn Air Bake Broil Oven Range Ignitor

Started by AJ

Replies: 0
Views: 6584
Last post April 09, 2009, 08:49:06 PM
by AJ
Maytag Range top Burner ignitor randomly sparks by itself

Started by neutronspin

Replies: 4
Views: 3665
Last post July 15, 2009, 06:27:15 PM
by JWWebster