ge ref please help

Enter Model Number Help

Enter Part Number

RepairClinic

APWagner

FixYourBoard.com

AppliancePartsPros

[ddd]

I have same problem with the PSS26PStass with dual coolling system fresh food side frozen ,and read 60-70 degree, freezer fine read 0 or -1.

GE tech Change mainboard , interface and still same problem fresh food side freezing but temp shows 70 degree, freezer fine with 0 degree, now after taking with other tech I thing  Refrigerator Thermistor WR55X10025 because it is all iced on top of eveporator, I do not know how to change Refrigerator Thermistor WR55X10025 I found location but harness connect in fresh food side with blue plastic /rubber thing how to snap that? any picture or help to remove ?

please help I can not afford more money to pay to tech this is 3.5 year old refi.

Thanks

[JWWebster]

while waiting on an answer you could look over some of these manuals maybe?REFRIGERATION

[ddd]

while waiting on an answer you could look over some of these manuals maybe?REFRIGERATION

Thank you very much JWWebster.

Really help full manuals.

Thank you

[ddd]

Hi, This is all in side my refrigerator this dual climate zone .

look this photo in pdf attachments. any help appreciated for fixing this issue.

Thanks you.

[JWWebster]

If you look at the replacement part below, their is no connection at all, so that tells me you just cut and splice:
Thermister WR25X10025
I gotta tell you I have worked on older model ice boxs without all this fancy stuff, the terminator( defrost thermal disc) always comes cut and splice, I bet this one does too.

[ddd]

If you look at the replacement part below, their is no connection at all, so that tells me you just cut and splice:
Thermister WR25X10025
I gotta tell you I have worked on older model ice boxs without all this fancy stuff, the terminator( defrost thermal disc) always comes cut and splice, I bet this one does too.

Thanks JWWebster

I will try that as soon as part arrived on Mon/Tue just one quick question need to solder this wire to joint or just twist and put electrical tap or something else.

Thanks for all your help.

ddd

[Mr.Bob]

Use some wire nuts to make the connection

[JWWebster]

You could use butt connectors and shrink tape to keep corrosion at a minimum.

[ddd]

Use some wire nuts to make the connection

Thanks Mr. Bob I use that.

ddd

[ddd]

Now I change  Refrigerator Thermistor WR55X10025 still same problem all ice in refrigerator side.

Below the list of new parts already change.

New main board
New interface
new refrigerator thermistor

still temp on electronic interface reads 83 (But everything in side frozen) an freezer side 0. everything fine in freezer.

damper open closed fine.
Now i am clue less any idea?

Thanks
ddd

[Repair-man]

Repace the evaporator thermister. Should have been done before replacing the board.

[ddd]

Repace the evaporator thermister. Should have been done before replacing the board.

I change this part Thermister WR25X10025 I think this same one as evaporator themisters.

I do not know this is right? please let me know.
Thanks
ddda

[jumptrout51]

There are 2 fresh food thermisters. Change them both.

[ddd]

There are 2 fresh food thermisters. Change them both.

Thanks I see other on the side panel I will order one more and change
it.

Any other part I need for this problem?
thanks
ddd

[20 Years of Experience]

John Pahl - Milbank, SD 57252 20 Years of Experience

Service Information