Author Topic: ge ref please help  (Read 4895 times)

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
ge ref please help
« on: October 29, 2009, 09:05:15 PM »
I have same problem with the PSS26PStass with dual coolling system fresh food side frozen ,and read 60-70 degree, freezer fine read 0 or -1.

GE tech Change mainboard , interface and still same problem fresh food side freezing but temp shows 70 degree, freezer fine with 0 degree, now after taking with other tech I thing  Refrigerator Thermistor WR55X10025 because it is all iced on top of eveporator, I do not know how to change Refrigerator Thermistor WR55X10025 I found location but harness connect in fresh food side with blue plastic /rubber thing how to snap that? any picture or help to remove ?

please help I can not afford more money to pay to tech this is 3.5 year old refi.

Thanks

Model pss26pstass

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: ge ref please help
« Reply #1 on: October 29, 2009, 09:57:36 PM »
while waiting on an answer you could look over some of these manuals maybe?REFRIGERATION
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
Re: ge ref please help
« Reply #2 on: October 30, 2009, 06:07:02 AM »
while waiting on an answer you could look over some of these manuals maybe?REFRIGERATION


Thank you very much JWWebster.

Really help full manuals.

Thank you

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
Re: ge ref please help
« Reply #3 on: October 31, 2009, 03:40:46 PM »
Hi, This is all in side my refrigerator this dual climate zone .

look this photo in pdf attachments. any help appreciated for fixing this issue.

Thanks you.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: ge ref please help
« Reply #4 on: October 31, 2009, 04:15:50 PM »
If you look at the replacement part below, their is no connection at all, so that tells me you just cut and splice:
Thermister WR25X10025
I gotta tell you I have worked on older model ice boxs without all this fancy stuff, the terminator( defrost thermal disc) always comes cut and splice, I bet this one does too.
« Last Edit: October 31, 2009, 04:18:31 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
Re: ge ref please help
« Reply #5 on: November 01, 2009, 06:33:25 AM »
If you look at the replacement part below, their is no connection at all, so that tells me you just cut and splice:
Thermister WR25X10025
I gotta tell you I have worked on older model ice boxs without all this fancy stuff, the terminator( defrost thermal disc) always comes cut and splice, I bet this one does too.

Thanks JWWebster

I will try that as soon as part arrived on Mon/Tue just one quick question need to solder this wire to joint or just twist and put electrical tap or something else.

Thanks for all your help.

ddd

Offline Mr.Bob

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 1
Re: ge ref please help
« Reply #6 on: November 01, 2009, 09:12:01 AM »
Use some wire nuts to make the connection

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: ge ref please help
« Reply #7 on: November 01, 2009, 01:16:56 PM »
You could use butt connectors and shrink tape to keep corrosion at a minimum.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
Re: ge ref please help
« Reply #8 on: November 01, 2009, 02:31:16 PM »
Use some wire nuts to make the connection


Thanks Mr. Bob I use that.

ddd

Offline ddd

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 16
Re: ge ref please help
« Reply #9 on: November 03, 2009, 05:51:24 AM »
Now I change  Refrigerator Thermistor WR55X10025 still same problem all ice in refrigerator side.



GE WR55X10025 Temperature Sensor, AP3185407




Below the list of new parts already change.

New main board
New interface
new refrigerator thermistor

still temp on electronic interface reads 83 (But everything in side frozen) an freezer side 0. everything fine in freezer.

damper open closed fine.
Now i am clue less any idea?

Thanks
ddd