Author Topic: Washer not agitating, spinning or draining  (Read 1500 times)

Offline shellmybell15

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 1
Washer not agitating, spinning or draining
« on: October 25, 2009, 01:24:50 PM »
My washer filled with water and never started agitating and so I thought to drain the water by running the spin cycle and it wont do that either .... when pulling the knob out it just ticks and but doesnt turn to cycle...

what do i need to do?

Model LSQ8543JQ0

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Washer not agitating, spinning or draining
« Reply #1 on: October 26, 2009, 04:31:41 PM »
Sounds to me like 2 problems here.
1. A bad lid switch not allowing the machine to pumpout.
2. A bad direct drive coupling not allowing the machine to agitate or spin.
Make sure the timer pointer is a little past the SPIN mark on the dial.Turn it on,raise and lower the lid to see if it pumps out.
It should pump water out unless the lid switch is bad or something is stuck in the drain pump.
A garment in the drain pump would also stall the motor from agitating as well.
« Last Edit: October 26, 2009, 04:34:43 PM by jumptrout51 »
Take a Kid fishing.

 

Estate washer not spinning, draining, or agitating. model ETW440WQ0

Started by Temp21

Replies: 3
Views: 658
Last post July 26, 2014, 01:03:17 PM
by Temp21
GE front loader washer not agitating or spinning

Started by coueshunter

Replies: 20
Views: 8105
Last post October 18, 2010, 06:55:47 PM
by TechGuy
WhirlPool Cabrio Washer not agitating/spinning fast

Started by Tedebear

Replies: 1
Views: 1497
Last post November 06, 2013, 07:40:41 PM
by Jdm
WhirlPool Cabrio Washer not agitating/spinning fast

Started by Tedebear

Replies: 1
Views: 690
Last post November 09, 2013, 04:42:26 PM
by Jdm
Whirlpool Washer Not agitating or spinning

Started by massopust13

Replies: 6
Views: 1162
Last post December 08, 2013, 07:28:04 AM
by Loenow
Whirlpool washer not agitating

Started by jdman

Replies: 25
Views: 29374
Last post January 18, 2013, 10:28:43 PM
by AJ