Author Topic: JKP45WP Need a tech in the Pittsburgh area  (Read 1135 times)

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 88
    • Repair control boards for home appliances
JKP45WP Need a tech in the Pittsburgh area
« on: October 23, 2009, 07:15:05 PM »
Hi Guys,

I have a customer in Pittsburgh who we repaired a board for. Now, he has an F3 error (temperature sensor open, maybe oxidized contacts on the plug or bad sensor). He needs a good tech to come fix that for him.

Any takers?

Best Regards,
Bruce
www.fixyourboard.com - We repair electronic control boards.

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 88
    • Repair control boards for home appliances
Re: Need a tech in the Pittsburgh area
« Reply #1 on: October 23, 2009, 10:08:56 PM »
... should have mentioned,  zip is 15203

... a good reference would be appreciated ... rather than having him pick one at random from the YP ... although that should work I think
www.fixyourboard.com - We repair electronic control boards.

Offline rmbraught

  • Technician
  • Member Since: Oct 2009
  • Posts: 47
  • Country: us
Re: Need a tech in the Pittsburgh area
« Reply #2 on: October 31, 2009, 09:26:18 AM »
Hello, new to registration, but been reading posts here for a few months...
I'd recommend the company I work for (I'd recommend *me* ;-)
AfterHours Appliance Repair 800.840.8005 theappliancefix.com
We dispatch out of Bellaire Ohio but have several techs (including me) running
the Pittsburgh area Mon-Fri. I personally have a very thorough electronics background...
Q? Sounds like a Whirlpool, if your customer already had their board serviced (and
installed it as a do-it-yourselfer),
why don't they just go ahead and replace the oven probe?
Cheers,
-Robert

Offline fixyourboard

  • Technician
  • Member Since: Sep 2009
  • Posts: 88
    • Repair control boards for home appliances
Re: Need a tech in the Pittsburgh area
« Reply #3 on: October 31, 2009, 06:09:30 PM »
My memory may be failing me but I think we came the conclusion that there is an issue with the sensor plug-end that plugs in to the control board (open circuit). It's a double oven, getting F3 on upper and lower not heating if I recall. We did fix a board problem and it fully checks out ... I'd take a couple of sensors along and possibly bottom element. I forwarded this link to him.

THanks for answering,
Bruce
www.fixyourboard.com - We repair electronic control boards.

 

Need wiring diagram and tech manual

Started by jumptrout51

Replies: 1
Views: 1524
Last post November 26, 2008, 06:31:41 PM
by jumptrout51
Are there any good Maytag technician in the Southern California area?

Started by grannyx3

Replies: 8
Views: 1971
Last post March 26, 2009, 06:00:32 AM
by Icehouse
JKP45WV1WW Looking for a tech in Seattle

Started by fixyourboard

Replies: 0
Views: 726
Last post November 12, 2009, 08:41:08 AM
by fixyourboard
Looking for Miele oven Tech manual

Started by krazytech

Replies: 0
Views: 1209
Last post November 18, 2009, 04:42:29 AM
by krazytech
GE profile stove manual or tech sheet?

Started by rego

Replies: 19
Views: 3444
Last post October 17, 2011, 12:02:33 PM
by rego
Need a Tech Sheet!

Started by NewTech11

Replies: 1
Views: 619
Last post November 17, 2012, 07:04:08 AM
by ScottyMo1