Author Topic: How to get to the pressure switch?  (Read 1149 times)

Offline needhelp!

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 1
How to get to the pressure switch?
« on: October 22, 2009, 06:30:30 PM »
I need to to check my pressure switch on my washer because it is overfilling. How do I remove the switchboard? :o

Model WCSR2090D5WW

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: How to get to the pressure switch?
« Reply #1 on: October 22, 2009, 09:04:00 PM »
4 screws at the top of the control panel get removed and it is right there. Toe remove the part simply pry up the locking tab a hair and twist that dude. You may not need to replace the part. just blow out the air line to the tub and retry;


GE WASHER MANUAL
« Last Edit: October 22, 2009, 09:06:06 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1250
  • Country: us
    • Buy me a beer through paypal
Re: How to get to the pressure switch?
« Reply #2 on: October 23, 2009, 08:37:34 AM »
Check the pressure switch hose at the tub, I have seen a lot of them plug up.(30+) Even in the air dome,remove the hose at the switch and blow it out. If that works try some water in the hose and blow it out again.

Follow us on Google+
 

Top-load washer overflows but pressure switch and tube are good

Started by nholling

Replies: 1
Views: 2502
Last post December 11, 2009, 09:17:34 AM
by JWWebster
pressure switch trying to make sure its set right ge profile washer

Started by hotpointtech

Replies: 6
Views: 3234
Last post August 18, 2010, 01:22:27 AM
by hotpointtech
pressure switch not activating intermittantly

Started by jeff456

Replies: 3
Views: 1706
Last post October 06, 2010, 09:13:54 PM
by mattlwil
Amana LWC 40 AW Pressure Switch

Started by dourobob

Replies: 1
Views: 1881
Last post January 02, 2011, 07:41:47 PM
by JWWebster
Lid Switch error

Started by patron

Replies: 9
Views: 5022
Last post March 12, 2008, 02:49:25 PM
by patron
lid switch

Started by brad

Replies: 2
Views: 2334
Last post April 24, 2008, 04:52:12 PM
by brad