GE Top Load Washer Not Spinning

[crydee1]

The Reset works.......IT LIVES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Spinning is working fine now, the LED is blinking 1 time per second and faster with the spin on. We ran it through a whole cycle and it works great again. Can't thank you guys enough, you have saved us a ton of money!!  Thank you, Thank you, have a great weekend guys!!

[JWWebster]

unplug for 30 sec... plug back in then with 10 sec open and close the lid 5 time then put into spin ... you may have to try 3 or three time to get the timing right...

this will reset the invert...do the hoky poky and buy that man a beer

[krazytech]

Hey JW pass me a beer for that one...Burp!!

[JWWebster]

here ya go babe KASHHHHHHHHHHHHHISH!!! Crackin a 40 my nizzle. The smoking lamp IS lit.

[krazytech]

Gulp,Gulp,Gulp, Burp... crack another one... and mark one down for the NEW guy....

[kellonnie]

check the water level switch , also make sure the clear tube going to tub isnt clogged. have had amchines just had to clear out tube and spun like new.

[mfowler]

We have been through the same process with the same washer.  We still have a problem with the locking nut on the center shaft coming lose.  How can we keep that tight?  Lock-tight?

[rayhaque]

One of my cats has a kidney infection and emptied a full bladder onto my bed.  With a FULL load in the wash - on a HOLIDAY WEEKEND, it decided to stop spinning on me.  I was moments away from cutting some wires to test the lid switch when I noticed the little green flashing light and did another Google search leading me here.

Your little reset lid-slamming hokey pokey reset the motor and got me spinning again.  I can't tell you how many stupid videos I watched and out of date materials I read through on the net and none of them mentioned this.

You have earned your beer.  Delivered!  :-)  Thanks again!!

[JWWebster]

Thanks Steve!