Author Topic: help with washer  (Read 1646 times)

Offline BLOOD,SWEATandGE

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 2
help with washer
« on: October 01, 2009, 03:52:15 PM »
hello every one,  my LG WM2277HS washer is giving the dreaded error code LE after 1 or so min. of trying to spin the drum, I say trying cause ill see it move a little and it looks like its locking up i can hear motor noise and see the drum almost fight its self. When the washer is off the drum will spin freely....

Thank you for any help...

Offline BLOOD,SWEATandGE

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 2
Re: help with washer
« Reply #1 on: October 02, 2009, 10:44:57 AM »
well here is an up date : tested hall sensor, motor, power from main board and harness
all test ok, so what do i do? take a stab in the dark and replace the main board ???

help!! im going  :D with this

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: help with washer
« Reply #2 on: October 02, 2009, 05:28:34 PM »
Here's what the manual has to say regarding the LE code:

The connector (3-pin, male, white) in the MOTOR
HARNESS is not connected to the connector
(3-pin, female, white) of STATOR ASSEMBLY.
The electric contact between the connectors
(3-pin, male, white) in the MOTOR HARNESS
and 4-pin, female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuited).
The hall sensor is out of order/defective

If you have OHmed out the wire harness from the main PCB to the motor, and have checked the stator on the motor for signs of broken or loose wiring, then you can assume the PCB is bad.

Here's the manual in case you don't have it:

WM2277 Service Guide
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 9293
Last post February 09, 2013, 07:41:01 AM
by def
Frigidaire Front Load washer making noise.

Started by curtis

Replies: 3
Views: 8230
Last post July 05, 2007, 09:25:04 PM
by AJ
Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 29584
Last post January 02, 2009, 01:09:38 PM
by AJ
Noisey Washer

Started by jdman

Replies: 15
Views: 7819
Last post July 28, 2007, 09:51:14 AM
by AJ
Estate washer leaking oil

Started by gearhead

Replies: 1
Views: 5975
Last post July 31, 2007, 06:39:31 AM
by AJ
Video: Whirlpool Washer Motor - Bad connection..

Started by AJ

Replies: 3
Views: 3470
Last post July 29, 2013, 06:32:05 PM
by AJ