WHIRLPOOL QUIET PARTNER 3 DISHWASHER NOT DRAINING

[reamal2]

MY DISHWASHER IS ONLY 2 YEARS OLD  AND IT HAS STOPPED DRAINING AFTER THE RINSE CYCLE, IT WILL DRAIN OUT IF YOU PUSH CANCEL/DRAIN BUT IT WOMT DO IT BY ITSELF.  
IF YOU DONT DRAIN IT OUT THE WATER JUST SITS IN THERE AND STINKS, DIDNT BUY THE EXTENDED WARRATY BECAUSE THE LAST ON LASTED 20 YEARS. CAN ANYONE HELP ME?

Model GU2455XTSQ0

[Al Capone]

Hi,

Please post the model number for us.
You can find the model number on the model/serial number tag that is located on the dishwasher.

The diagram below will show you were to look for it, thanks.

[JWWebster]

It should be something like:
DU2000XSO  sorta like that

[reamal2]

it is GU2455XTSQ0 thanks

[AJ]

I updated the topic to include the correct model number information, thanks.

Did you get your dishwasher repaired or do you still need help?

[reamal2]

I still need help. thanks

[whirlpooltech]

Check the drain hose for kinks or restrictions.
Is the drain connected to a garbage disposal under the sink?

If so remove the hose from the disposal and look in both ends to see if there is food, grease, etc. plugging things up.

[reamal2]

the dishwasher drains fine if I push the drain button, it just doesn't drain by itself after the cycle.  the water sits in there and stinks, if I don't manually drain it

[reamal2]

Does anyone have any answers or is this whirlpool a piece of crap?

[Repair-man]

Here's an answer that seems to fit:

Your electronic control is bad. If you can manually drain the machine but it won't do so automatically, then this is the  only logical conclusion. The drain pump is energised during the last 1.5-2 minutes at the end of every wash cycle, as the Tech Sheet shows.

Your dishwasher is no more crappy than any other these days.
Welcome to the world of appliances made with outsourced electronics