Author Topic: Maytag gas drier burners won't stay lit.... with a twist.  (Read 7955 times)

Offline ZoneIII

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 8
Maytag gas drier burners won't stay lit.... with a twist.
« on: September 22, 2009, 03:23:15 PM »
I have a Maytag LDG4914AAE dryer (1994) that won't stay lit.  It started a couple days ago when I found that the drier had been running for many hours and the clothes were still damp (the burner had gone out).  The venting is all clean.  That was the first thing I checked. Even so, I disconnected it from the dryer and tested it again.  But here's the strange thing:  The dryer will fire up if you start it after it has been sitting for a while but the burner will go out after five minutes or so and not come back on. If you you restart it, the burner will not go on.  But if you let it sit for 15 minutes or so, the burner will start again but go out after a few minutes again and not come back on.  ALso, the timer is not advancing.   I have worked on many appliances before but, not being sure exactly what it causing this problem, I don't want to just start replacing parts as a process of elimination.  Hopefully the symptoms will allow someone to help me pinpoint the problem.

BTW, what a great site.  I really appreciate it that I can download service manuals.   ;D

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #1 on: September 22, 2009, 03:54:19 PM »
If your glow ignitor is coming back on and not igniting you will need to replace the gas valve coils.
Take a Kid fishing.

Offline ZoneIII

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 8
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #2 on: September 22, 2009, 04:20:28 PM »
Thank you very much Karma. 

I just watched the cycles with the front panel off.  The igniter glows every time the burner cycle starts and the gas comes on and ignites for three or four cyles.  From that point on, the igniter comes on but the gas doesn't and then the igniter just goes out, of course.   Would bad coils work that way - in other words, work for the first three or four cyles every time I turn the dryer on when the dryer has cooled down for a while and then not stop working after from that point on?    ALso, if I turn off by opening the door,  then  quickly turn it back on, the gas won't come on even for the first cycles.  For some reason, the dryer has to sit for a while and then when it is turned on, the burner will light for three or four cycles.

Also, would bad coils prevent the timer from advancing? Does the burner have to cycle on and off correctly for the timer to advance?   

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #3 on: September 22, 2009, 05:06:01 PM »
yep replace them coils Check THIS out
ALSO:
Buy them coils here for a dang good price and help support this effort

Part # 279834 Coil Kit for Dryer Gas Valve (2 Coils, New Style), AP3094251


« Last Edit: September 22, 2009, 05:09:07 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ZoneIII

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 8
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #4 on: September 22, 2009, 05:41:48 PM »
Karma.  Thanks again! 

One more question:  If the coils are bad and causing the problem, would that also cause timer to NOT advance?   When the gas no longer turns on, the dryer continues to run (with no flame) until I turn it off because the timer isn't advancing.  I seem to remember reading that the burner ties into the timer circuit so bad coils could explain the timer not advancing but I just want to run that by you (or anyone else).

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #5 on: September 22, 2009, 05:44:45 PM »
In auto dry the timer will not advance with no heat. Timed dry the timer should advance.
Take a Kid fishing.

Offline ZoneIII

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 8
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #6 on: September 22, 2009, 06:53:43 PM »
Thanks!   That makes sense. I'll order the coils.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #7 on: September 23, 2009, 03:53:00 AM »
Hm-m-m, we must be all named "Karma" here :)

You'll not get very far running that dryer with the front off...you ruin the airflow thru the burners  and will cause the hi-limit thermostat to open.

"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline ZoneIII

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 8
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #8 on: September 23, 2009, 09:47:30 AM »
"Hm-m-m, we must be all named "Karma" here"

 ;) LOL!  My face is red right now!

I'm not running it for long with the front off but only long enough to test it.  It seems to act the same way when the front is on. I wanted to make sure the ignitor isn't bad (it isn't).   I'm not really sure if the burner went on for the three or four cyles that it does with the front off or whether it just goes on once. I'll put the cover back on and check.  Thanks much!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag gas drier burners won't stay lit.... with a twist.
« Reply #9 on: September 23, 2009, 10:35:10 AM »
All during the drying the burner goes on and off.
 It does NOT stay on or you would have baked clothes.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Maytag Neptune Dryer won't stay lit

Started by mjes

Replies: 5
Views: 5041
Last post January 12, 2008, 11:22:38 PM
by rickgburton
Maytag Neptune Gas Dryer - won't stay lit

Started by ttekcol

Replies: 2
Views: 4828
Last post May 03, 2009, 01:38:23 AM
by laundryman
Maytag Drier - Wont Start/replaced dryer belt

Started by AeroZ51

Replies: 21
Views: 6813
Last post August 16, 2011, 08:50:19 PM
by JWWebster
Maytag Gas Dryer won't stay lit

Started by lauze

Replies: 10
Views: 3823
Last post June 09, 2012, 04:08:03 PM
by AJ
maytag electric dryer motor wont stay running

Started by abducens

Replies: 7
Views: 2516
Last post July 29, 2012, 03:01:09 PM
by AJ
maytag drier model mde8000ayq takes too long to dry clothes

Started by skevink

Replies: 5
Views: 1173
Last post December 31, 2012, 03:43:46 PM
by dab147315