ras6233kq0 roper washer fills with water nothing else though

[bigjon30]

the washer fills with water but will not do anything else checked lid switch its good


ras6233kq0

[JWWebster]

Here is how I do it. Is it the motor or is it the timer right? That is the question. My solution: I have a control panel off of an old machine. I tied the 3 wires together on the water level switch(that is an old trick to get a washer to agitate without water in the basin) and jumped out the lid safety switch. I use it as a motor checker for direct drives. I also plug it into the base of a washer to check for spin and wash. If everything under works I know it is the timer or control board.


Washer Motor Part # 661600

[cnorth06]

Check for power going down to your motor leads. Also in some models there's a little capacitor on the back wall of the shell that could be cutting down the voltage. If you have power going to your motor it's most likely your timer.


Washer Motor Start Capacitor Part # 8572717

[bigjon30]

good deal you guys know your stuff glad i found this site