Author Topic: Kenmore (70) electric dryer timer problems??  (Read 2870 times)

Offline bigzinmiami

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 8
Kenmore (70) electric dryer timer problems??
« on: September 13, 2009, 11:10:49 AM »
Here's some history on the unit.   It started to not dry so well, especially on humid days.   I researched on the forum and did the whole lint cleanout routine, and yes, lint was caked on the thermostat near the blower wheel.  I checked all the electrical parts for continuity and visually inspected the heating element while on (dang that emits alot of heat).    All that and the unit did work better, but it seems on days we are doing multiple loads it does get inconsistent.

Then a new thing occurred.  When the high heat run finishes the unit shuts off and the buzzer sounds....and doesn't stop.  And I think (not fully verified) that if you turn it a little more to stop the buzzer, it eventually starts the no heat cycle on its own.

Soooo, appears to be a timer problem which needs replacement.  Am I right?

Could this also have added to the inconsistent and poor drying in the past also?

Since I am going to buy a part, should I repace anything else that is low cost and easy?  I prefer not to be penny wise and pound foolish, and to take it apart multiple times.   It still beats buying a new unit for $800+ (the wife is eyeing those fancy top of the line units...which means I got to get the color coordinated matching washer  :2funny: ).

Model 110.96573220

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore (70) electric dryer timer problems??
« Reply #1 on: September 13, 2009, 01:58:40 PM »
Is that  a wrinkle guard dryer? If so that buzz and run some more without heat is built in to keep them clothes from getting wrinkled.
« Last Edit: September 13, 2009, 05:13:25 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline bigzinmiami

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 8
Re: Kenmore (70) electric dryer timer problems??
« Reply #2 on: September 13, 2009, 02:47:11 PM »
yes, there is a wrinkle guard setting, but this occurs at the end of the high heat setting after the 10 minute cool down.  It literally will buzz for hours unless you manually turn it back around to the beginning of the either the wrinkle guard cycle, or the high heat cycle.


Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore (70) electric dryer timer problems??
« Reply #3 on: September 13, 2009, 02:59:04 PM »
Take your exhaust vent completely off and try a cycle.
Sure, it will stall at the end due to the bad timer, part # 3398193
but your dry times will either change or not.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

TImer problems with Kenmore HE2 Gas Dryer

Started by infrared013

Replies: 13
Views: 5845
Last post January 11, 2010, 10:40:27 PM
by agharez
Kenmore Series 70 Electric Dryer thermostat problems

Started by wet

Replies: 2
Views: 6188
Last post February 25, 2011, 08:00:45 PM
by JWWebster
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 4460
Last post August 07, 2007, 08:21:33 AM
by AJ
Kenmore Electric Dryer - Quits in mid-cycle

Started by GaryGG

Replies: 5
Views: 5082
Last post February 15, 2008, 04:07:19 PM
by JWWebster
Kenmore 70 series electric dryer...wont heat

Started by lalakelley

Replies: 53
Views: 40545
Last post November 24, 2011, 02:40:03 AM
by RegUS_PatOff
Kenmore electric dryer no heat

Started by pcornelius

Replies: 3
Views: 4896
Last post May 30, 2008, 11:44:50 AM
by RegUS_PatOff