Author Topic: Kenmore dryer not heating, could it be thermal cutout?  (Read 1437 times)

Offline justburself

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 1
Kenmore dryer not heating, could it be thermal cutout?
« on: September 08, 2009, 05:46:22 PM »
My dryer stopped heating.  Taking your advice from the other posts, I checked the resistance for all connections the only thing that doesn't show any resistance is the thermal cutout.  Could this be the problem?

I checked the coils, not broken.  Although the filter was a bit overfilled, it didn't seem to have been blocked all the way down.  The thermal fuse, hi limit thermostat, and the heating element all showed resistance.

Could I use a jumper wire for the thermal cutout to test it?

any help would be appreciated thanks!!!

Model 110.66752500

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore dryer not heating, could it be thermal cutout?
« Reply #1 on: September 08, 2009, 06:43:47 PM »
Yes you can jump it out for test purposes.
And yes, if it does not read it is bad and is most likely your only problem.
Take a Kid fishing.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore dryer not heating, could it be thermal cutout?
« Reply #2 on: September 08, 2009, 08:18:37 PM »
Be sure to correct any lint buildup or vent blockage issue or that limit will just keep blowing.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Lady Kenmore portable 110V clothes dryer heating element does not turn off

Started by mizzn1t

Replies: 1
Views: 4058
Last post November 26, 2008, 07:43:07 PM
by JWWebster
Replacing the Heating Element on a Kenmore Serise 70 Electric Dryer

Started by jracmm

Replies: 1
Views: 2533
Last post December 02, 2008, 07:34:16 PM
by JWWebster
Kenmore dryer blowing thermal fuses

Started by Grayfox

Replies: 6
Views: 3861
Last post December 22, 2008, 08:32:07 PM
by Grayfox
279816 Whirlpool Thermal Cut-Off For Dryer Heating Element

Started by AJ

Replies: 0
Views: 5569
Last post March 22, 2009, 08:38:14 PM
by AJ
Kenmore Model 70 electric dryer heating element 279838

Started by kjb

Replies: 1
Views: 5292
Last post April 24, 2010, 12:47:40 PM
by JWWebster
Kenmore Elite HE3 11084832201 electric front load dryer not heating

Started by Mitchell

Replies: 4
Views: 3615
Last post August 03, 2012, 08:42:39 AM
by dab147315