Author Topic: GE Gas Cooktop  (Read 1005 times)

Offline Kungur

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 1
GE Gas Cooktop
« on: September 02, 2009, 06:27:10 PM »
I need to repalce the Spark Module. I removed the screws in the burners but I cannot seem to lift the glass off.
Is there something I am missing?
Thanks

Model JGP932BEC

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Gas Cooktop
« Reply #1 on: September 02, 2009, 07:17:32 PM »
The glass is taped down around the edges with sticky tape. I generally have to pry carefully around the underside of the unit with a screwdriver to release the top from the base. It is sealed this way to create good burner operation without air leaks. Lift the unit up about 1" from the counter to get to the seal.
« Last Edit: September 02, 2009, 07:19:17 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Replacing top on cracked glass ceramic cooktop

Started by er

Replies: 5
Views: 10060
Last post August 14, 2008, 07:20:03 AM
by AJ
How to remove old cooktop

Started by Johnslc

Replies: 1
Views: 3631
Last post August 07, 2008, 02:41:42 PM
by Repair-man
Jenn-Air Cooktop Burner only Heats on High

Started by TechnicianBrian

Replies: 0
Views: 2981
Last post August 31, 2008, 07:05:19 AM
by TechnicianBrian
Electrolux Cooktop no Hot Surface Indicator Light

Started by TechnicianBrian

Replies: 0
Views: 3238
Last post September 25, 2008, 01:23:19 PM
by TechnicianBrian
Cooktop igniter clicking and switches now do not work

Started by mattmoman

Replies: 1
Views: 2751
Last post September 27, 2008, 03:07:41 PM
by JWWebster
Replacing Ceramic/Glass range cooktop

Started by campmasterb

Replies: 7
Views: 6010
Last post October 06, 2008, 07:34:44 PM
by campmasterb