Author Topic: will not spin  (Read 3724 times)

Offline mscindy68

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 13
Re: will not spin
« Reply #10 on: August 23, 2009, 09:12:40 PM »
I cannot find the asrerick, but I started the washer on a small load, the agitator is agitating. Is the tub supposed to be moving as well?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: will not spin
« Reply #11 on: August 23, 2009, 09:31:11 PM »
The inner tub should not move when the washer is agitating. The brake should hold the inner tub to keep it from spinning during the wash cycle.

How much does the outer tub move?

Quote
I see that the clutch drum spins during the spin cycle. the brake does not seem to move.

You may need to remove the transmission from the washer so you can get a good look at the brake.

It should look like this.



Make sure that plastic tab connects with the clutch as shown in this photo.



Let us know what you find.
Hope you find our website helpful.

Offline mscindy68

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 13
Re: will not spin
« Reply #12 on: August 23, 2009, 09:58:38 PM »
If I remove the transmission, do I have to remove the agitator first?
And if so, how does it come off? There is no 7/16 nut holding it on.

Offline mscindy68

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 13
Re: will not spin
« Reply #13 on: August 23, 2009, 10:00:58 PM »
And neither the outer nor the inner tub move at all.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: will not spin
« Reply #14 on: August 23, 2009, 10:16:46 PM »
I ment inner tub in my above post, sorry for the mix up. I edited my first post to correct it.

Quote
If I remove the transmission, do I have to remove the agitator first?
And if so, how does it come off? There is no 7/16 nut holding it on.

Yes you would have to remove the agitator before removing the transmission.
I looked up your model number and here is the diagram for your agitator. #2 is the bolt that holds the agitator in place.




This topic has some photos that will show you how to remove the agitator.

http://appliancejunk.com/forums/index.php?topic=105.0
Hope you find our website helpful.

Offline mscindy68

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 13
Re: will not spin
« Reply #15 on: August 23, 2009, 10:34:02 PM »
I know the diagrams say there should be a bolt, but I do not see it. I will take a photo and post. It will be tomorrow before I post. And I really do appreciate what you guys are doing! What  a huge help!!!!
Thank you

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: will not spin
« Reply #16 on: August 23, 2009, 10:56:04 PM »
On them newer models you have a square plastic hole. You put a 3/4 drive into and turn it lefty loosey till it comes out. Then you lift the top half of your agitator off and then you can see the bolt that holds the bottom half onto the tranny. Get that off and lift out the bottom portion of that agitator, then you can remove the 3 bolts on the bottom and slide out the tranny. Hay you may have a broken plastic piece like the one posted above by fearless leader. Look close at the ear portion that fits into the clutch. The tip breaks and will not catch and release the brake. (Click on picture to enlarge)
« Last Edit: August 23, 2009, 11:03:03 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: will not spin
« Reply #17 on: August 23, 2009, 11:12:08 PM »
This looks like the latest style agitator dog and cam kit. See that bottom left hand thingy? That has a square hole in it. You unscrew that part to get the top portion out yer way then yas can get to dat bolt holding down the agitator base.
« Last Edit: August 23, 2009, 11:14:00 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline mscindy68

  • VIP Member
  • Member Since: Aug 2009
  • Posts: 13
Re: will not spin
« Reply #18 on: September 08, 2009, 05:34:13 PM »
I finally got to work on it again, and I Found the brake was stuck. I got it loose, and now it spins! But, when it sopsit makes a heck of a noise, and then it sounds like a brake is going on. Any ideas?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: will not spin
« Reply #19 on: September 08, 2009, 09:13:07 PM »
My brother just had the same symptom. We removed the tranny and field tested it. It made a horrible noise . We then removed the clutch and the cover on the tranny and found the main gear stripped to hell and back. Replaced main gear and pinion and shes runs better than she has in years. AJ has the part priced right HERE
« Last Edit: September 08, 2009, 09:15:54 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 29596
Last post January 02, 2009, 01:09:38 PM
by AJ
Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 63090
Last post February 21, 2011, 01:22:14 PM
by bwhelan
whirlpool belt drive washer won't spin

Started by mthd60sprty

Replies: 7
Views: 7861
Last post June 06, 2013, 08:42:12 AM
by fairbank56
Whirlpool direct drive agitates but no spin

Started by philhyde

Replies: 19
Views: 8544
Last post October 04, 2007, 12:32:52 PM
by philhyde
Kenmore (frigidaire?) washer 417.29042991 No Spin - drains fine

Started by ratt2581

Replies: 1
Views: 6815
Last post September 21, 2007, 09:44:54 PM
by AJ
Front end tumble action washer 417.29042991 No Spin - drains fine

Started by ratt2581

Replies: 15
Views: 10824
Last post September 26, 2007, 05:37:06 PM
by AJ