Forum > Washer Repair

Noisey Washer

<< < (2/4) > >>

jdman:
In feeling under side the pump belt feels to what I would say is a little loose. The noise doesn't sound like what a belt would make though

AJ:

--- Quote from: jdman on July 28, 2007, 07:28:34 AM ---I see no grease at all. The agitator has a litle play in it but not much. Don't know for sure how much is suppose to be but it does wiggle a little

--- End quote ---

Try again with the agitator removed. There is a 1/4" screw on the side that holds the agitator on.

AJ:

--- Quote from: jdman on July 28, 2007, 07:38:27 AM ---In feeling under side the pump belt feels to what I would say is a little loose. The noise doesn't sound like what a belt would make though

--- End quote ---

Yeah loose belts are normal on these washers.

jdman:
The shaft is tight. When I move it the whole tub moves.

AJ:

--- Quote from: jdman on July 28, 2007, 07:46:38 AM ---The shaft is tight. When I move it the whole tub moves.

--- End quote ---

That's good then.
 
Next I would run the washer without the pump belt off and see if it still makes the noise.

If the noise stops it's something with the water pump making the noise.

Can you tell were the sound is coming from running the washer with the front cover off?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version