I have a kitchenaid side by side and the icemaker quit working. There was no ice in the tray and the arm was stuck in the 6:00 position. I replaced the selinoid valve as has been the problem in the past with other units I have had, and tried to jump the motor. no luck. I have 120 voltage to the wiring harness, but no voltage between L and N. When the module was cold, I was getting continuity between L and N. I assume my module is fried, but I am looking for some confirmation. I did read other threads and got no voltage between T and H. Thank you for any help you can give me.