Kenmore Elite Dishwasher - No Power

[malam]

 This is my first post on this forum. Hello to all.

I had problems with noise from the motor a week ago and it finally died.  I bought a replacement pump/motor assembly which was installed yesterday.  I  reinstalled the dishwasher, turned on the power and ..... nothing !  No lights no sound, nothing.  I checked to make sure power (120V) is getting to the unit.  This afternoon, I also checked the door switch and the Thermal switch with an ohmmeter - both are OK.  What else can I check ?
Any help will be appreciated.
Thanks.

Model 665.16469300

[JWWebster]

The water level switch might be the problem. Just a guess. I think the unit will not run until water is in the tub so that the pump won't be damaged. Since the water level float switch is a micro switch which powers that motor that ain't already a happy camper. I hate dishwashers. Oh i can fix em. i just don't love messing with them. But since nobody else wanted to help I am gonna jump in there.

[Mr. Fix-It]

Couldn't find a diagram of your model but I think the Kenmore Elite has a thermal fuse mounted on the control which is located under the inside door panel. When it seems like there is no power this is usually the culprit.

[Al Capone]

Diagram of the control panel.

[Mr. Fix-It]

Thanks Al that's it part #6 on the diagram.

[Al Capone]

#6 on the diagram is dishwasher fuse kit

WHIRLPOOL 8193762 Dishwasher Fuse Kit, AP3178588

[malam]

Problem Fixed !  The door switch was partially stuck!  Thanks for all the suggestions.  I appreciated the help.

[Al Capone]

Glad to hear you got it repaired. 

Thanks for the update.