Author Topic: GE Harmony GAS DPGT750GC - No Power but 120V  (Read 5898 times)

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #10 on: July 17, 2009, 02:30:46 PM »
... Took it all apart, cleaned out the lint vents, etc.  Fired her up, all worked, blower motor, coil fired, gas fired, then POOF!  It all shutdown....  
he didn't say he put it back together ..

(some have black buttons)

« Last Edit: July 17, 2009, 02:32:55 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #11 on: July 17, 2009, 03:05:23 PM »
What is the part number and temp range for that jewel?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #12 on: July 17, 2009, 04:16:04 PM »
What is the part number and temp range for that jewel?

Its in the manual,speedy  :)


Last part I found was WE04X10119
« Last Edit: July 17, 2009, 04:20:21 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #13 on: July 17, 2009, 05:17:13 PM »
I couldn't find a picture of the GE WE04X10119  $ 32

the picture I posted was from an LG $ 12

6931EL3003C  BLACK BUTTON
6931EL3003F  RED BUTTON

Open at 212 12F   (100 7C)
Manual reset


There also may be a "Open at 230 12F (110  7C)  Manual reset"  model

I think some LG models now use an "Automatic Reset" Thermostat in that location



High Limit Thermostat Part # 6931EL3003C


« Last Edit: July 17, 2009, 05:21:36 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #14 on: July 17, 2009, 06:13:27 PM »
I could probably get that one from QB products for $4
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline thadden71

  • VIP Member
  • Member Since: Jul 2009
  • Posts: 8
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #15 on: July 20, 2009, 12:34:55 PM »
Well guys, guess my work is not done. 
The dryer heats up hotter than hell with 1 item in it.  As soon as the wife put in a full load, i am back to the heat issues.  I got into the diagnostic (My Cycles and Back).  Shows no problems.  I also got into the service diagnostic (Start Stop/Help) and it shows all OK.  The blower is turning over 2400RPM, i can hear the gas kick on, and then the Heating goes to OK, flame sensor on.  It also shows the heat levels for In/Out go up.  Just weird.
Any ideas of why i would have a heat issue with a load in?

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #16 on: July 20, 2009, 12:58:45 PM »
define  "hotter than hell"

define "heat issues"

also, is this on the Automatic Dry setting or Timed Dry ?



Dryer Vent

Vent should be rigid metal.

Short lengths of flexible metal may be OK, if not crimped when moving the Dryer into place.

NO plastic

NO PVC

NO screws

Foil Duct Tape is OK.

With an empty load, Timed Dry, High Heat, the vent temperature should cycle somewhere between 135F and 160F


If you have a Harbor Freight store in town:

Sometimes on sale or coupons (take on-line flyer ad to store)

(maybe could use a few)
click on picture $ 2.99
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline thadden71

  • VIP Member
  • Member Since: Jul 2009
  • Posts: 8
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #17 on: July 20, 2009, 02:08:41 PM »
define  "hotter than hell" - The inside of the dryer is hot when only 1 item or empty.  The drum was "hotter then hell" as in I didn't want to leave my hand on it for more than a quick touch.

define "heat issues" - It is more like temperature issues.  The gas and fire ignite, i can hear it come on, then go off.  So, it is almost like there is a sensor not working properly as it comes on but fails to maintain the heat. 

also, is this on the Automatic Dry setting or Timed Dry ? - I have tried both the predefined cycles and timed with highest temp with the same results.



Dryer Vent

Vent should be rigid metal.  -  All piping to outside is rigid.

Short lengths of flexible metal may be OK, if not crimped when moving the Dryer into place.  - There is 1.5 ft. of flexible pipe in between dryer and wall.

NO plastic. - None

NO PVC - None

NO screws - None

Foil Duct Tape is OK.

With an empty load, Timed Dry, High Heat, the vent temperature should cycle somewhere between 135F and 160F

Ran with an empty load, heard gas fire up, temp coming out vent pipe reached 180F.  Then heard gas go off and temp dropped steadily to 104.  Did not come back on

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
« Last Edit: July 20, 2009, 07:19:32 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline thadden71

  • VIP Member
  • Member Since: Jul 2009
  • Posts: 8
Re: GE Harmony GAS DPGT750GC - No Power but 120V
« Reply #19 on: July 21, 2009, 09:37:09 AM »
JW:  That sounds like the problem.  It looks like i have to replace the entire gas valve though.  it is part # WE01X10201.  I am going to pull it open again to verify.  Thanks again for all your guys great ideas and help.  It is much appreciated.
I'll let you know if this works.  Maybe someone else will google this thread in the future.  Thanks again.

GE WE01X10201 Valve Assembly Gas, AP3794580



 

Neptune Dryer Gas Valve Asmbly Power, Bad Booster, or Other?

Started by PartTimeHomeRepa

Replies: 2
Views: 1727
Last post June 08, 2008, 04:49:05 PM
by Repair-man
GE profile harmony dryer will not heat up

Started by stim

Replies: 11
Views: 13433
Last post January 23, 2009, 04:14:44 PM
by Kayakcrzy
TD33 ASKO Clothes Dryer TD33, dead after power surge, is there a fuse?

Started by kidsteele

Replies: 2
Views: 2549
Last post March 18, 2009, 07:15:44 PM
by jumptrout51
ge profile ,harmony model ,electric dryer

Started by tiffngab

Replies: 2
Views: 2739
Last post March 17, 2009, 08:22:35 PM
by JWWebster
Speed Queen Dryer (no power to timer motor)

Started by goodsusedappliance

Replies: 2
Views: 1545
Last post July 02, 2012, 06:36:50 AM
by JWWebster
WE4M388 GE Dryer Main Power Control Board

Started by AJ

Replies: 0
Views: 3522
Last post June 03, 2009, 03:59:58 PM
by AJ