Author Topic: Maytag Performa  (Read 2670 times)

Offline PamelaGor

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 2
Maytag Performa
« on: June 28, 2009, 05:19:56 PM »
Machine started intermittently not spinning/draining.  Next was a loud banging/grinding noise, but worked fine.  Now it will agitate fine but spin or drain will not work.  Any ideas?

Model pavt234aww

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Performa
« Reply #1 on: June 29, 2009, 11:51:51 AM »
Most of the time that is a bad pump. It turns ok on wash but the bearing locks up in spin. Easy fix. Tip the washer back and remove the belt from the bottom. Turn the pump both ways. Look for evidence of bearing seperation in the pump. This is common on these particular washers.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline PamelaGor

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 2
Re: Maytag Performa
« Reply #2 on: June 29, 2009, 08:07:26 PM »
Thanks!  Will check that out! :)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Performa
« Reply #3 on: June 30, 2009, 07:30:16 AM »
Hmm, loud bang, no spin...better check  for a bad lid switch after you do all the easy stuff underneath as JW suggested. The Performa manual is inside the beginning of this forum.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

maytag performa out of balance

Started by mechemd1

Replies: 1
Views: 1991
Last post December 31, 2007, 06:47:41 PM
by AJ
Maytag Performa Washer will fill (after changing snubber) but will not agitate

Started by PD

Replies: 10
Views: 7366
Last post January 01, 2008, 05:14:06 PM
by AJ
Maytag Performa This forum helped me. Thanks

Started by ArnieTX

Replies: 5
Views: 3075
Last post January 22, 2008, 07:33:08 PM
by ArnieTX
Maytag Performa Won't Spin

Started by matthewdurango

Replies: 4
Views: 3838
Last post February 03, 2008, 02:36:16 PM
by JWWebster
Maytag performa spinning out!

Started by lowhook

Replies: 39
Views: 14416
Last post July 07, 2009, 11:13:44 PM
by JWWebster
16023083 Maytag Performa Washers Service Manual

Started by whirlpooltech

Replies: 0
Views: 3734
Last post March 22, 2008, 07:54:25 PM
by whirlpooltech