Author Topic: Whirlpool direct drive washer won't spin  (Read 9699 times)

Offline CT Jayson

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 13
Whirlpool direct drive washer won't spin
« on: June 28, 2009, 08:48:34 PM »
I am having the same problem that my Whirlpool washer will not spin.  My question is how do I know for certain that the clutch is bad?  I took the washer apart and found the clutch pads were not seated properly in the housing. After reseating the pads I put the washer back together and it spun with not problems, however, when I stopped it and tried restarting it it would not spin again. Took it apart again and found the same thing as before the the clutch pads not seated again.  Just for my own info I tried it again with the same results.  Does this sound like the clutch?  Thanks

Model LSR8010PQ0
« Last Edit: June 28, 2009, 08:56:09 PM by Al Capone »

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Whirlpool direct drive washer won't spin
« Reply #1 on: June 28, 2009, 08:57:08 PM »
Hi,

Please be sure to read, Posting Basics - Starting a New Topic.

Note were it says towards the bottom.

Quote
Please do not ask your own question in a topic.
In other words, please don't hijack the topic and make it yours.
Start your own topic and reference the other topic related to your issue.

I have made your reply into a new topic.

What is the model number of your washer?

RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline CT Jayson

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 13
Re: Whirlpool direct drive washer won't spin
« Reply #2 on: June 28, 2009, 09:04:31 PM »
Thank you very much. the model number is LSR8010PQ0

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Whirlpool direct drive washer won't spin
« Reply #3 on: June 28, 2009, 09:09:10 PM »
Thanks CT Jayson,

I updated the topic to include the correct model number information.

Now we just need one of the experienced Whirlpool technicians to stop by and give us there opinion. :)
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool direct drive washer won't spin
« Reply #4 on: June 28, 2009, 09:11:59 PM »
Is the clutch all oily?
Is the washer noisy when it spins or when it stops?

Offline CT Jayson

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 13
Re: Whirlpool direct drive washer won't spin
« Reply #5 on: June 28, 2009, 09:21:45 PM »
Not very noisy at all, the "usual" noises.  There was a little oil inside if the clutch.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool direct drive washer won't spin
« Reply #6 on: June 28, 2009, 09:34:05 PM »
There should be no oil inside the clutch.

If there is any age on this washer and there is not a puddle of oil on the floor from the gear box I would just replace the clutch.



 

Offline CT Jayson

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 13
Re: Whirlpool direct drive washer won't spin
« Reply #7 on: June 28, 2009, 09:36:23 PM »
Thank you very much. So I will replace the clutch.  Is there a seal I should replace on the transmission while I have it open?

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool direct drive washer won't spin
« Reply #8 on: June 28, 2009, 09:44:53 PM »
Here is the seal that goes around the shaft on top of the gear box.

Unless you can see that the oil is coming from around that shaft seal I would not worry to much about a little oil.

I have never replaced one of them seals myself, but I know JW has. Maybe he can add something to the topic, but I believe you will have to open the gear box up to replace that seal.

Here are some photo of the gear box if you would like to see inside one. :)

Direct Drive Gear Case - Transmission Photos

How old is the washer?

Offline CT Jayson

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 13
Re: Whirlpool direct drive washer won't spin
« Reply #9 on: June 28, 2009, 09:48:09 PM »
The washer is less than 5 years old. 

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 29606
Last post January 02, 2009, 01:09:38 PM
by AJ
Whirlpool direct-drive washer will not spin, then will if turned by hand slightl

Started by alaball

Replies: 2
Views: 3022
Last post May 29, 2009, 10:11:07 PM
by alaball
whirlpool direct drive washer won't spin

Started by viking351

Replies: 14
Views: 6080
Last post June 26, 2009, 05:57:27 PM
by viking351
Whirlpool direct drive washer won't spin

Started by fsimcox

Replies: 2
Views: 3205
Last post November 14, 2009, 05:34:17 AM
by apprich
Whirlpool direct drive Washer intermittant spin problem

Started by jwp

Replies: 3
Views: 1952
Last post September 07, 2011, 10:04:48 AM
by JWWebster
Video: Whirlpool Made Direct Drive Washer Motor Coupler Replacement

Started by AJ

Replies: 18
Views: 44120
Last post May 18, 2010, 06:53:50 AM
by gimpyjones