Author Topic: Maytag Performa Pav2300aww Not Spinning please help  (Read 7122 times)

Offline slm28638

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 1
Maytag Performa Pav2300aww Not Spinning please help
« on: June 28, 2009, 10:02:16 PM »
Hello,

     My washer is not spinning it does agitate, and the belt spins but the tub doesnt move in the spin cycle. I put it in spin and lifted the lid pushed down on the lid saftey and waited it does drain completely but the tub never moved. I check for something caught between the tubs nothing in there what else should I check.

Thank you for the help wife is driving me crazy :ticked off:

Model Pav2300aww

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Performa Pav2300aww Not Spinning please help
« Reply #1 on: June 29, 2009, 06:40:52 AM »
Look in the Maytag washer library for the Performa manual, as you likely need to replace the thrust bearing assembly under the machine.
Not such a big deal and not very expensive. The instructions come with the kit.

Thrust bearing kit part # 12002213

"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Performa Pav2300aww Not Spinning please help
« Reply #2 on: June 29, 2009, 11:06:36 AM »
The tub is locked for wash mode. For spin mode the motor reverses and releases the brake and the tub spins. The kit comes with various washers to replace so that the brake will release. If you put too many then the tub won't lock in wash mode and the clothes will get knotted up. Too few washers and the brake will not release. The tougest part of this job is getting that dang clip on last to hold everything in place. I cheat by using a pry bar against the brake spring just to make it a tad easier to get that clip on.
« Last Edit: June 29, 2009, 11:08:33 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Maytag performa spinning out!

Started by lowhook

Replies: 39
Views: 17149
Last post July 07, 2009, 11:13:44 PM
by JWWebster
maytag performa out of balance

Started by mechemd1

Replies: 1
Views: 2514
Last post December 31, 2007, 06:47:41 PM
by AJ
Maytag Performa Washer will fill (after changing snubber) but will not agitate

Started by PD

Replies: 10
Views: 8841
Last post January 01, 2008, 05:14:06 PM
by AJ
Maytag Performa This forum helped me. Thanks

Started by ArnieTX

Replies: 5
Views: 3719
Last post January 22, 2008, 07:33:08 PM
by ArnieTX
Maytag Performa Won't Spin

Started by matthewdurango

Replies: 4
Views: 4545
Last post February 03, 2008, 02:36:16 PM
by JWWebster
16023083 Maytag Performa Washers Service Manual

Started by whirlpooltech

Replies: 0
Views: 4984
Last post March 22, 2008, 07:54:25 PM
by whirlpooltech