Author Topic: Neptune overflowing  (Read 982 times)

Offline sparky823

  • VIP Member
  • Member Since: Sep 2007
  • Posts: 132
Neptune overflowing
« on: June 24, 2009, 11:24:26 PM »
I saw in the paper that someone had a Neptune washer for sale. I called and asked about it and he said it is the 4000 model and it had the door lock/control board replaced a few years ago. They had no more problems until the other day and they came home and water was running in the tub and overflowing from the machine although the washer wasn't even on. He said that his wife wanted to get a new one in a top load because she was tired of bending over to load/unload it so they bought a new Maytag Bravos.
My question is, what could be the problem with this machine? Maybe the water valve,but why would it start pouring in water when the machine was off? I have heard of them sticking during the fill cycle but not sure about just doing it while it is off.
I have a 4000 myself and I thought about getting this one just to tinker with or maybe use the boards in mine if I ever need them?
He is asking $100OBO---so what is your opinion????

Thanks

Model MAH4000

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Neptune overflowing
« Reply #1 on: June 25, 2009, 06:55:50 AM »
Water valves commonly fail in a manner that causes them to run water even with the machine off. (It's a diaphragm failure)

On the Neptune, it means a new water valve. You'll need to have the serial number as well, since the water valves changed during production of this series. $100 is a lot to  pay for a used washer...offer them $50 instead so you can perform repairs with less guilt.

All Parts For this Model MAH4000aww


"Tired of bending over"...that's a good one :)
« Last Edit: June 25, 2009, 06:58:18 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 6358
Last post February 09, 2013, 07:41:01 AM
by def
Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 57460
Last post February 21, 2011, 01:22:14 PM
by bwhelan
Maytag Neptune MAH3000AWW Serial 19103060UB

Started by LarryC

Replies: 9
Views: 7232
Last post September 29, 2007, 09:49:12 PM
by AJ
Maytag Neptune MAH4000AWW Won't Drain Water / Smell

Started by mightymac

Replies: 22
Views: 22442
Last post February 15, 2013, 04:35:03 PM
by def
Maytag Neptune will not shut off.

Started by Boatsrule

Replies: 12
Views: 4612
Last post November 02, 2007, 10:15:35 PM
by sparky823
Maytag Neptune MAH4000AWW

Started by BOB V

Replies: 5
Views: 2792
Last post December 22, 2007, 06:36:49 AM
by AJ