floor is dry....
Currently checking the ball sensor and pressure switch. I have removed the ball sensor from assembly and checked resistance. I have yellow/blue 3.1K Ohm, yellow/red .956 K Ohm, and red/blue 2.35 K Ohms. This is consistant if ball is settled or not. I was expecting a change in resitance with the ball settling or not settling in its "level" position.
Pressure Switch- I'm getting 22 ohms across the blue/purple, 7 ohms across white/purple and blue/white. I'm not sure what I should be seeing.
Would either of these be capable of shutting down the main board (no LED)?
The door switch seems to be mechanically working fine. We have not had any motor/mechanical grinding of the motor.
Installed new noise filter, pwd main board, and new display boards. I assumed/hoped this would have covered the "no power" problem to this LG washer.