Author Topic: Kenmore Dryer not dying cloths all the way  (Read 1707 times)

Offline Lynchmob

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 1
Kenmore Dryer not dying cloths all the way
« on: June 17, 2009, 11:48:45 AM »
My dryer does not dry the clothing all the way.  Spin cycle in washer seems good.  Changes the Temp sensor on exhaust air, changed High Stat sensor.  Heating element ohms out at 10.4 ohms. Will check the air temp tonight.  Could it be my timer running too fast?  or the resistor connected to the auto dry setting.

Model C110-8450290

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore Dryer not dying cloths all the way
« Reply #1 on: June 17, 2009, 02:17:12 PM »
Remove the exhaust vent from the rear and run a timed load at 45 minutes. If it dries OK clear your vent/lint obstruction.
Take a Kid fishing.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore Dryer not dying cloths all the way
« Reply #2 on: June 17, 2009, 02:45:09 PM »
Not sure if this is a gas or electric dryer, but for safety you do not want to run a gas dryer without a vent connected to the dryer.

 

Kenmore Dryer

Started by jdman

Replies: 6
Views: 6101
Last post August 12, 2007, 07:30:06 PM
by AJ
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 4325
Last post August 07, 2007, 08:21:33 AM
by AJ
Kenmore 71802 Gas Dryer won't stay hot

Started by Chris

Replies: 3
Views: 5644
Last post August 21, 2007, 07:22:14 PM
by Pegi
Kenmore dryer door won't shut!

Started by krisncameron

Replies: 8
Views: 16323
Last post April 29, 2011, 08:21:47 PM
by evesnlm
Kenmore Dryer Model 110.76660100 Heater wires burned

Started by gwilli

Replies: 2
Views: 6096
Last post January 16, 2008, 01:31:15 PM
by JWWebster
Sears Kenmore Dryer - Makes Rumbling Noise

Started by AJ

Replies: 0
Views: 4724
Last post January 04, 2008, 05:37:36 PM
by AJ