Author Topic: Whirlpool Side by Side  (Read 2782 times)

Offline Asianjade

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 27
  • Country: us
  • Sea Breeze
    • Buy me a beer through paypal
    • SEA BREEZE APPLIANCE PARTS AND SERVICES
Whirlpool Side by Side
« on: June 12, 2009, 05:18:24 PM »
I have customer on Fixya that has A Whirlpool Side by side model # GS6SHAXLS03 We have been going in circles on resolving this problem and I need all the expert's and Pro's to be in involved to relsolve this. Here are some of the notes from that post that began with an incorrect model number. Photos will come later. Please note I am sponsor friendly and support most including appliancepartspros.com As I will post them on my bog http://appliancepartsandtechnicalservices.blogspot.com/
The link to the Fixya blog is
http://www.fixya.com/support/t2325896-whirlpool_refrigerator_ice_dispenser_nohttp://www.fixya.com/support/t2325896-whirlpool_refrigerator_ice_dispenser_no
My first solution was OK, I show parts that are available for that model, sounds like the control board is defective for your dispenser, or possibly the Ice maker control board. It also could be a break in the wiring or the control itself. Below is a break down for those parts, wiring and the control behind the push to dispense ice or water. Hope it is not that control because some places don't provide that part. Now if it's a connection problem that we can find, I will do my best to help you solve this. Could you insure the model number is correct as this is very important? appliancepartsse@yahoo.com
I will need to make the photos smaller to post them here, but will be updating my site later through the day. Thanks to Everyone, Asianjade

Model GS6SHAXLS03
Asianjade

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Side by Side
« Reply #1 on: June 12, 2009, 07:50:33 PM »
Wow we need technician Brian fer this one.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Asianjade

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 27
  • Country: us
  • Sea Breeze
    • Buy me a beer through paypal
    • SEA BREEZE APPLIANCE PARTS AND SERVICES
Re: Whirlpool Side by Side
« Reply #2 on: June 12, 2009, 08:14:13 PM »
Yes, I have been scrambling my brains on this one. The customer is really interested in getting it fixed. I did a lot of research and about the only thing I can come to is either the controls on front of dispenser and behind the buttons has short or the auger motor is defective. Hey, JW go to my site I have posted in the first post and look at the photos. Let me know when Brian will be back. I have noticed that all our sponsors have limited info because of copyright issues. Promised the wife and daughter I will take them to Beach to night, so I too may be late getting the info. Later and thanks JW, Asianjade/Sea Breeze
Asianjade

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Side by Side
« Reply #3 on: June 12, 2009, 09:09:03 PM »
One thing I have ordered for peeps in the past is a small board that mounts behind the panel. I beleive you remove the drip guard and get 2 screws out then you can raise the control panel and release it from the door, you can then access the board
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Asianjade

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 27
  • Country: us
  • Sea Breeze
    • Buy me a beer through paypal
    • SEA BREEZE APPLIANCE PARTS AND SERVICES
Re: Whirlpool Side by Side
« Reply #4 on: June 12, 2009, 09:26:04 PM »
Here are their last remarks from them to me, J. Webster>>> John,
I have attached the photos. I verified that it is a Whirlpool model GS6SHAXLS03.
The fork object is not turning. The closing of the ice dispenser flap is the noise heard after releasing the ice dispenser button(s).   The two screws which hold the object which turns the fork, seen in last pictures with ice container removed, are not loose.  I can press the object down - it is inside a small metal ring - and it returns to its normal position. Thx again
JW go to my site evey so often because the site refreshes after new post, Hey Thanks, For the information JW, Asiianjade/Sea Breeze
http://appliancepartsandtechnicalservices.blogspot.com/
Asianjade

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Re: Whirlpool Side by Side
« Reply #5 on: June 12, 2009, 10:37:25 PM »
Well JW invited me to this thread, but I am a little confused as to the what is going on. The original question on Fixya stated water was dispensing and the ice maker was working, but the ice was not dispensing.  This would indicate a problem with the auger motor or the wiring leading to it.  I also read a reply about replacing the module which has nothing to do with the dispenser so I hope that information has been dismissed.  There is no board associated with the dispenser on that model as it is simply a set of buttons that change the routing of the power to the motor.  So as was mentioned, if the freezer door switch is closed, then 120vac should be read between the blue and white wires at the motor when the ice dispenser lever is pressed.  If there is no voltage, then it would be time to remove the dispenser cover and check the voltage at the dispenser lever switch.  If there is voltage, then the DC outputs from the motor would need to be verified to determine if the motor was the issue or dispenser selector buttons.  Playing the odds, I would suspect the inverter board on the motor as failed due to water leaking down the auger coupler shaft, but that would need to be verified with a multimeter.  If the customer has access to a multimeter, they will need to run the circuit and verify voltages, or they can just start replacing the associated parts.  Hope this helps.

Offline Asianjade

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 27
  • Country: us
  • Sea Breeze
    • Buy me a beer through paypal
    • SEA BREEZE APPLIANCE PARTS AND SERVICES
Re: Whirlpool Side by Side
« Reply #6 on: June 12, 2009, 10:50:40 PM »
Good to see you here, just in time because we got too many experts saying this is that and that includes me. I'm going to post this directly to the customer first and post your replies and profile if OK. On my site  http://appliancepartsandtechnicalservices.blogspot.com/
I really appreciate your help in this problem and experience! Thank You, SublimeMasterJW, and you also TechnicianBrian, Asianjade/Sea Breeze 
Asianjade

 

Whirlpool ed5fhaxss00 side by side no ice

Started by sandy

Replies: 4
Views: 4500
Last post July 20, 2007, 07:07:46 PM
by AJ
A New Look for the Whirlpool (and Kitchenaid) Side by Side Dispenser

Started by TechnicianBrian

Replies: 0
Views: 1416
Last post July 23, 2008, 07:23:39 AM
by TechnicianBrian
Sears Whirlpool side by side fridge mfgr in 2000 ice freezes up at bottom of ice

Started by marky

Replies: 12
Views: 5497
Last post April 04, 2010, 06:14:24 PM
by JWWebster
Noisy Whirlpool Side-by-side

Started by jez p

Replies: 0
Views: 1254
Last post March 19, 2009, 08:18:02 AM
by jez p
Whirlpool fridge leaking in fridge side... Help Repair-man

Started by Calbo

Replies: 1
Views: 2197
Last post July 29, 2009, 08:12:20 PM
by jumptrout51
R-102 Whirlpool 2003 High Counter-Depth Side-By-Side Refrigerator Service Manual

Started by AJ

Replies: 0
Views: 1335
Last post August 20, 2009, 01:02:56 PM
by AJ