Author Topic: Error Code 21? Huh?  (Read 6650 times)

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Error Code 21? Huh?
« Reply #10 on: June 14, 2009, 05:35:56 PM »
select your fav button on the machine (cept fer the pause/cancel button) and do this to put that mutha in test mode:
Push dat button fer 5 seconds,release it fer five seconds
push it again fer five mo seconds and realease it fer five seconds push it agin fer 5 seconds. If ya did it right ya should get an 88 in dat sisplay winder.
This will give you the falut code which i suspect is the fuse. Check the fuse for continuity and replace it if open.  Retry
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Error Code 21? Huh?
« Reply #11 on: June 14, 2009, 05:38:52 PM »
a better view from the rear of yer dryer witht he dust cover removed
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Error Code 21? Huh?
« Reply #12 on: June 14, 2009, 05:41:03 PM »
a better view
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Error Code 21? Huh?
« Reply #13 on: June 14, 2009, 05:44:05 PM »
This ain't nothing but a plain jane whirlpool dryer with a fancy electronic control. Replace anything in the back that does not have continuity
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline missnaz

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 14
Re: Error Code 21? Huh?
« Reply #14 on: June 14, 2009, 08:50:45 PM »
Thank you, Aj. Sincerely. Sendin' good karma to you and helpful others.

I will do the thermostat in the next couple of days.

Offline missnaz

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 14
Re: Error Code 21? Huh?
« Reply #15 on: June 14, 2009, 08:54:52 PM »
... rather the fuse... I don't know what the dang thing is called but I do know where it is and what it looks like (thanks to you!).

Offline missnaz

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 14
Re: Error Code 21? Huh?
« Reply #16 on: June 20, 2009, 12:14:01 AM »
Tomorrow is the big day to tackle the dryer and the demonic dust bunnies. Is there some place other than online where I can pick this fuse up? (Hey, in the interest of "business", I promise to refer lotsa people to this site...)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9598
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Error Code 21? Huh?
« Reply #17 on: June 20, 2009, 11:52:59 AM »
Quote
Is there some place other than online where I can pick this fuse up?

Any place that does appliance repair should have them.

Hope you find our website helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Error Code 21? Huh?
« Reply #18 on: June 20, 2009, 12:07:25 PM »
Give me yer address I will mail ya one.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline missnaz

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 14
Re: Error Code 21? Huh?
« Reply #19 on: June 20, 2009, 12:47:00 PM »
You know, you amaze me. Thank you for the offer and the kindness.

We found a fuse (Sears), installed it and now we're getting a CF 1 (I think... I am currently trying to display codes again.)

I was sooooo hoping it was just the fuse.

 

Whirlpool Steam Dryer F23 Error Code

Started by TechnicianBrian

Replies: 2
Views: 6547
Last post April 25, 2008, 08:25:02 PM
by TechnicianBrian
Error code 40 on Oasis Elite Dryer

Started by MWCmike

Replies: 3
Views: 4360
Last post September 16, 2008, 03:36:21 PM
by Repair-man
Frigidaire error code E9E

Started by thansen

Replies: 2
Views: 5331
Last post October 26, 2008, 02:40:02 PM
by thansen
Electric Dryer LEQ2152ES0 not heating error code e56

Started by DeeStough

Replies: 11
Views: 10812
Last post February 23, 2011, 12:06:45 AM
by AJ
overheating 7E error code

Started by aliborden

Replies: 5
Views: 3619
Last post November 21, 2008, 07:38:50 PM
by RegUS_PatOff
Frigidaire Front Load Dryer Error Code DR

Started by sharitac

Replies: 6
Views: 15530
Last post April 26, 2009, 09:07:40 AM
by JWWebster