A few coins got into the silverware basket and were blown out of the basket by the water pressure. Several slid down to the bottom where they were carried toward the water evacuation tubes and have settled underneath some large white plastic housing at the bottom of the interior of the machine. There are white plastic fin-like vertical pieces in a circle underneath the housing to prevent larger items from getting past, but the coins slid by. I am guessing they are too large to be evacuated, but they are now past my reach.
I can remove the washer arm, but do not know how to remove this while plastic housing assembly which is underneath the arm. I can see the coins, so if I can remove this housing, I should be able to fix the problem before it causes real problems. Thanks.