Author Topic: GE lack of agitation  (Read 1213 times)

Offline Yogi.304

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 3
GE lack of agitation
« on: June 02, 2009, 08:41:13 PM »
The agitator, (and shaft) have 90 degrees of freedom, and often don't get connected during the agitation cycle.  Is this most likely to be mechanical, or electrical, and how do I get started trouble shooting it.  (or should I skip that part, and just shoot it?)  It is about three years old, and was used for two years, then spent a year in storage.  It worked a few times before acting up, and refusing to agitate.  (It makes a loud clicking noise when it as malfunctioning)

Model WBXR1060TAWW

Offline Mr. Fix-It

  • Technician
  • Member Since: Jan 2009
  • Posts: 352
Re: GE lack of agitation
« Reply #1 on: June 03, 2009, 06:58:20 AM »
The first thing I would check is the agitator coupling. The agitator pushes down on top of it and the splines sometimes strip. If the coupling is Ok then I think you probably have a bad transmission.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE lack of agitation
« Reply #2 on: June 03, 2009, 10:21:23 AM »
As Mr Fixinator says, here is most likely the part you will need to replace:
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Kenmore 90 Series - No agitation

Started by jastek

Replies: 24
Views: 8290
Last post February 23, 2008, 06:18:42 AM
by whirlpooltech
ge washer no agitation

Started by JPG

Replies: 1
Views: 2234
Last post March 17, 2008, 07:58:44 PM
by JWWebster
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 9403
Last post March 28, 2008, 09:18:30 AM
by PB3
Whirlpool Washer Noise During Agitation and no Spin

Started by TechnicianBrian

Replies: 3
Views: 4154
Last post June 19, 2008, 09:00:45 PM
by JWWebster
GE washer fills & drains, no agitation

Started by Patricio

Replies: 6
Views: 763
Last post January 29, 2013, 11:02:18 AM
by LowSL2
GE Wizard agitation problem, is this the transmission/motor or something else?

Started by dsatchell

Replies: 4
Views: 1930
Last post September 01, 2009, 10:24:36 PM
by Jake