Author Topic: Maytag Performa won't agitate, but will spin  (Read 2635 times)

Offline helpless in LA

  • VIP Member
  • Member Since: May 2009
  • Posts: 1
Maytag Performa won't agitate, but will spin
« on: May 19, 2009, 02:45:59 PM »
I have been trying to troubleshoot my Maytag Washer and thought I had the answer...
The washer when in agitate mode (motor and spindle in clockwise motion) makes a loud grinding noise and the agitator does not move. I replaced with agitator base thinking the plastic grooves had worn against the metal grooves on the top of the shaft.
This was not the case.
After reading the repair manual, it must have something to do with the input pinion, clutch spring, dual cluster gears or dual crank gears.
I now have the entire thing apart in my garage (sort of like peeling back an onion) wondering where I should go from here.
Any help would be greatfull.

Regards,

Ed

Model PAV2300

 

Maytag Performa Washer will fill (after changing snubber) but will not agitate

Started by PD

Replies: 10
Views: 9251
Last post January 01, 2008, 05:14:06 PM
by AJ
Maytag Performa Won't Spin

Started by matthewdurango

Replies: 4
Views: 4729
Last post February 03, 2008, 02:36:16 PM
by JWWebster
Maytag Performa Agitates, no spin

Started by Joshuajared

Replies: 3
Views: 7690
Last post September 16, 2008, 10:15:34 PM
by Repair-man
Maytag Performa spin problem

Started by chrismorrow02

Replies: 3
Views: 6813
Last post December 15, 2008, 07:21:33 PM
by Repair-man
Maytag Performa Will not agitate all other functions ok

Started by jpspain

Replies: 3
Views: 3812
Last post January 01, 2009, 10:17:17 PM
by Repair-man
Maytag by Performa washer, Outta balance during spin cycles

Started by xman

Replies: 9
Views: 5599
Last post January 15, 2009, 09:15:04 AM
by xman