Author Topic: f-3 code  (Read 1162 times)

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 131
f-3 code
« on: May 05, 2009, 09:13:30 AM »
my oven doesn't work and I have an f-3 code? Is there a way to get misc ge codes from some where/ ?  tks  JPG

Model jgbs23dem1bb

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: f-3 code
« Reply #1 on: May 05, 2009, 09:23:37 AM »
These are old but standard codes:
GE / Hotpoint / RCA
Oven Fault Codes
Display Condition Remedy
F0 & F1 Failed Thermistor Control Replace ERC
F2 Oven Temp Exceeds 590 with unlocked door High resistance in Sensor, likely a bad sensor
F3 Open Sensor circuit Open (blown) sensor fuse or bad Sensor
F4 Shorted wire or Sensor locate short and correct it
F7-A Function pad button stuck Clean and unstick
F7-B Bad Clock Replace Clock
F8 Electrical component failure Replace ERC
F9 Program with door circuit Check wiring
« Last Edit: May 05, 2009, 09:26:58 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 131
Re: f-3 code
« Reply #2 on: May 05, 2009, 09:31:08 AM »
excellent thank u very much !!!

donate
$1, $2, $5, $10, $20, $50
 

Frigidare LEVM30FE Microwave E21 code

Started by Earl Dryer

Replies: 6
Views: 2778
Last post September 27, 2011, 04:48:24 PM
by rego
Whirlpool Microwave F2Q1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 2037
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian
Whirlpool Polara Range Error Code

Started by TechnicianBrian

Replies: 5
Views: 8250
Last post December 29, 2008, 09:03:25 PM
by TechnicianBrian
f-7 code

Started by JPG

Replies: 1
Views: 1662
Last post September 29, 2008, 09:07:33 AM
by JWWebster
F5 code on GE oven

Started by Glenn

Replies: 2
Views: 6119
Last post September 30, 2008, 09:14:06 AM
by JWWebster
Dacor Range F1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 17466
Last post November 09, 2008, 07:34:10 AM
by TechnicianBrian