Author Topic: Fridgidaire spinner not working  (Read 1316 times)

Offline MIGUELITO

  • VIP Member
  • Member Since: Apr 2009
  • Posts: 1
Fridgidaire spinner not working
« on: April 26, 2009, 05:16:50 PM »
Water is pumped out after the washing cycle but the spinner does not start.  How do I determine if the motor is burnt out?

Model FLSEC72GC26

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Fridgidaire spinner not working
« Reply #1 on: April 27, 2009, 04:22:28 AM »
Whip out your trusty volt meter and  go to the motor speed control located on the floor in the left rear. You are looking for 120 volts to the board (black and white) when the machine is set to spin.


There's also a tech sheet inside the lower  front panel in an envelope which will guide you thru the testing process. Or you can downoad the manual
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Whirlpool washer just stopped working

Started by mjrobs

Replies: 38
Views: 21058
Last post May 01, 2008, 06:08:42 PM
by AJ
MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED

Started by stacy2

Replies: 4
Views: 7423
Last post June 15, 2008, 09:18:30 PM
by stacy2
Kenmore (Fridgidaire) Front Load washer

Started by 8857mama

Replies: 1
Views: 2775
Last post September 24, 2008, 11:52:52 AM
by Repair-man
Water stopped working

Started by newcomputerera

Replies: 9
Views: 2568
Last post November 11, 2008, 12:58:57 PM
by newcomputerera
timer not working all the time

Started by sparky823

Replies: 3
Views: 1877
Last post November 16, 2008, 02:11:11 PM
by RegUS_PatOff
Kenmore Washer not working correctly

Started by Gron

Replies: 3
Views: 1966
Last post January 16, 2009, 03:15:02 PM
by whirlpooltech