Author Topic: Replacing my Broiler element  (Read 3798 times)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Replacing my Broiler element
« Reply #10 on: April 21, 2009, 02:55:11 PM »
Set the meter to 250  AC V

Turn on the oven and place one lead on each broil terminal.

If you don't see at least 236 volts show up on the dial, then the control is bad..if it does show true voltage, the element is out.

You can first use the meter to check across the incoming black and the red wires in the top to see if you actually have 240 volts.
« Last Edit: April 21, 2009, 02:56:44 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

NEEDED: Broiler element for JennAir Oven 88370 - Element # 715416

Started by kacee

Replies: 0
Views: 374
Last post October 08, 2014, 10:42:09 PM
by kacee
Whirlpool Range Bake Element Not Heating

Started by TechnicianBrian

Replies: 0
Views: 2509
Last post April 08, 2008, 07:08:16 AM
by TechnicianBrian
Whirlpool Range Surface Element not Working

Started by TechnicianBrian

Replies: 0
Views: 3309
Last post June 04, 2008, 11:06:40 PM
by TechnicianBrian
Replacing top on cracked glass ceramic cooktop

Started by er

Replies: 5
Views: 10505
Last post August 14, 2008, 07:20:03 AM
by AJ
Replacing Ceramic/Glass range cooktop

Started by campmasterb

Replies: 7
Views: 6571
Last post October 06, 2008, 07:34:44 PM
by campmasterb
Jenn-Air Range Right Rear Element not Heating

Started by TechnicianBrian

Replies: 0
Views: 2303
Last post October 21, 2008, 05:20:49 AM
by TechnicianBrian