Author Topic: Older Maytag washer still has water in the tub at the very end of cycle.  (Read 1954 times)

Offline 123123123

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 5
Older Maytag top load washer (sometimes) still has full tub of water at very end of cycle.  However, the pump works fine cause it pumps the water out the first half of every cycle

Model LAT9206BAE

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
timer OR motor
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Check the drain hose behind the washer to make sure it's not kinked over.

Sometimes coins will get between the inner and outer tub and restrict or plug the outlet at the bottom of the tub.

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1226
  • Country: us
    • Buy me a beer through paypal
Is the drain hose loose in the standpipe? ( taped & slow drain?) Is it off-balance? There are several problems that can result in the same symptom.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Check for a garment between the tubs.
Take a Kid fishing.

 

Maytag top load Washer is still full of water at end of cycle

Started by 123123123

Replies: 7
Views: 3974
Last post April 22, 2009, 01:28:56 PM
by JWWebster
Maytag centennial top load washer fills with water when the spin cycle is ending

Started by alimunib83

Replies: 9
Views: 1931
Last post April 20, 2013, 04:04:51 PM
by dab147315
How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 26959
Last post April 19, 2010, 08:23:29 PM
by JWWebster
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 2197
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag Ensignia washer won't extract water

Started by nandomay

Replies: 1
Views: 2785
Last post December 30, 2007, 11:53:58 AM
by TechnicianBrian
Maytag Washer - Fills with water, then does nothing...

Started by AJ

Replies: 7
Views: 8514
Last post February 21, 2008, 05:34:00 PM
by AJ