« previous next »
Pages: [1]   Go Down

Author Topic: TUB NUT  (Read 972 times)

Offline EYNN

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 2
TUB NUT
« on: April 16, 2009, 08:44:49 PM »
HI I NEED HELP IN LOCATTING A NUT THAT HOLDS THE INNER TUB THIGHT, IT IS 5 -3/16 INCHES IN DIAMETER,MADE OF WHAT LOOKS LIKE CAST ALUMINUM, THE EXPOLDED VEIW OF THE TUB ASSEMBLY DOES NOT SHOW THE HUB OR THE NUT.

Model Number: GVW9959KQ2 icon
Logged


Offline laundryman

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 19
Re: TUB NUT
« Reply #1 on: May 03, 2009, 01:33:02 AM »
pop the top on the agitator (differs if you have a dispenser on top or not) remove the agitator by either 7/16 bolt or a 1/2" square whitch will then have a bolt underneath that. the nut will be right there in the center
Logged

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3019
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: TUB NUT
« Reply #2 on: May 03, 2009, 07:51:07 AM »
For starters, there is NO agitator in here. Only a wash plate.

Here's the breakdown of your machine

GVW9959KQ2 Tub Parts Diagram

What makes you think you need to remove it??
« Last Edit: May 03, 2009, 07:54:56 AM by Repair-man »
Logged

"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com
Pages: [1]   Go Up
« previous next »