Author Topic: drain/spin problem  (Read 1224 times)

Offline genweld

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 1
drain/spin problem
« on: March 23, 2009, 02:13:35 PM »
We had a heavy load "jeans Sweatshirts" in the washer and it would not complete the wash cycle. At the rinse spin cycle the pump won't pump out the water and when the spin cycle starts it is slow then shuts down. I did the diagnostic test C00-08 and all function performed correctly. When we ran the machine empty the wash cycle went from start to finish as normal. We then put a lighter load in and it also worked correctly.  Before we did the diagnostic we got an error code "F02" Sud on the display. I followed the troubleshooting guide and none of the problems existed. Could it be a stretched belt.
Thanks

Model Number: ghw9100lw1 icon

Offline laundryman

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 19
Re: drain/spin problem
« Reply #1 on: May 03, 2009, 01:35:43 AM »
most likely debris in the water pump.

donate
$1, $2, $5, $10, $20, $50
 

Maytag Washer Spin & Drain Problem

Started by lulubovary

Replies: 1
Views: 2605
Last post March 11, 2008, 04:43:09 PM
by Repair-man
maytag neptune stackable slow spin no drain problem

Started by kellonnie

Replies: 0
Views: 1437
Last post November 11, 2009, 08:56:12 AM
by kellonnie
MAV7200AWW spin/drain problem

Started by LowSL2

Replies: 3
Views: 528
Last post June 06, 2013, 09:04:44 AM
by Bailey
whirlpool washer model LXR9245EQ1- won't drain-slow spin

Started by fixmeplz

Replies: 2
Views: 5981
Last post January 16, 2008, 10:13:02 PM
by JWWebster
Maytag LAT9356AAE Spin problem

Started by Camarocam

Replies: 2
Views: 4091
Last post February 20, 2008, 10:10:40 AM
by Repair-man
Kenmore Washer will not drain or spin, agitates on the agitate lo cylce only

Started by mattz

Replies: 5
Views: 8812
Last post March 11, 2008, 09:21:43 AM
by mattz