MY DRYER IS DRIVING ME LOOOPY LOL!
it runs and doesn't heat, then if i play with the cycle selector it will sometimes start heating. I've cleaned out the entire exaust system so I know it's not clogged.
So now I'm in the process of testing the thermostats.
The hi limit thermo checks ok, but I'm at a loss with testing the cycling thermo because it has 4 wire connectors, two silver ones on the outside and two copper ones on the inside. The outside terminals test out ok but I get no reading from the inside set...
I'm lost Should the inside ones also zero out? Also is there another possible problem I havn't considered..Thank you ahead of time to anyone that can come to my rescue!!!
PestiModel Number: lgr4634jq0