Author Topic: Door wouldn't lock replaced died after three loads.  (Read 1624 times)

Offline atbgdrew

  • VIP Member
  • Member Since: Apr 2009
  • Posts: 2
Door wouldn't lock replaced died after three loads.
« on: April 08, 2009, 05:04:50 PM »
Ok, have been surfin boards on this for two days now and finally going to beg for help....

Door lock on Affinity frigidaire just wouldnt lock Monday.  Read through boards ordered door lock and replaced this am.  Had an error code of EbF before but thought would try the door anyways.  Worked for three loads now same thing and same error.  Replace the control console is the recommended fix for this.  

Any thoughts on this?  Seems everyone has the same issue but didnt see any resolve to it in the forums.  

Also can anyone tell me where the control board is and how to remove it.  The door latch was easy but dont see anything on the control.

Thanks.

Model ATF7000ES1

Offline atbgdrew

  • VIP Member
  • Member Since: Apr 2009
  • Posts: 2
Re: Door wouldn't lock replaced died after three loads.
« Reply #1 on: April 08, 2009, 06:21:05 PM »
Also wont let me run the diagnostic because door wont lock to spin cycle, shows just the EbF code.  Which control board is that wanting to replace?  The front one or the speed control>/?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Door wouldn't lock replaced died after three loads.
« Reply #2 on: April 09, 2009, 06:00:01 AM »
The part you want is the Electronic control shown below.
Use the real manual to see how to replace it:

Affinity Washers (18.3 MB)

« Last Edit: April 09, 2009, 07:43:43 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Washer stops mid cycle. Wont spin. replaced door lock

Started by Sandinmaheye

Replies: 7
Views: 1800
Last post March 03, 2013, 12:42:49 PM
by Sandinmaheye
how to access door lock wax motor

Started by meem

Replies: 1
Views: 2303
Last post January 24, 2008, 03:23:59 PM
by RegUS_PatOff
What's inside? - Maytag Neptune Door Lock Wax Motor.

Started by AJ

Replies: 11
Views: 9567
Last post September 28, 2009, 04:58:48 PM
by Repair-man
Maytag Neptune MAH4000 door lock all the time

Started by tigerchuong

Replies: 5
Views: 4629
Last post September 18, 2008, 08:23:00 PM
by whirlpooltech
110.45962400 Door lock

Started by ch3ris

Replies: 2
Views: 2269
Last post November 02, 2008, 06:39:04 PM
by AJ
Maytag Neptune Lr code and now door lock problems

Started by anniechoco

Replies: 2
Views: 9166
Last post December 07, 2008, 09:01:38 AM
by anniechoco