Author Topic: Maytag washer sounds like a plane taking off during spin cycle.  (Read 3241 times)

Offline justinc25

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 17
Hi Guys,

I was just at my uncle's the other day, and his washer sounds like a plane taking off during the spin cycle. I think it may be like a plastic on plastic kind or sound. Maybe a bad bearing, or something needs to be lubed ?
The machine is only a couple of years old. I told him I'd look into fixing it for him.
I've done a few repairs on my old washer before. (Also a Maytag) I'm very knowledgeable in automotive technology. I figure If I can replace an engine in my Camry, I can fix his washer.
Let me know what you think.

Thanks,
Justin

Model SAV205DAWW

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #1 on: April 04, 2009, 05:47:59 PM »
Could be the bearing on the pump. The bearing is known to seperate in these.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline justinc25

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 17
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #2 on: April 04, 2009, 07:53:58 PM »
It's funny that you mention that. I replaced a pump that had locked up on my PAV2300AWW a couple of years ago.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #3 on: April 05, 2009, 06:27:00 AM »
The SAV205 is an Amana platform machine and does not have a pump like that. You are looking at a new triple-lip seal and tub bearing, hardly something you want to  delve into without all the funky tools needed to remove the tub hub & bearing.

The SAV205 has not been made since 2004 so the machine is at least 4-5 years old, not 2.
« Last Edit: April 05, 2009, 06:29:16 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline justinc25

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 17
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #4 on: April 05, 2009, 08:12:22 AM »
The SAV205 is an Amana platform machine and does not have a pump like that. You are looking at a new triple-lip seal and tub bearing, hardly something you want to  delve into without all the funky tools needed to remove the tub hub & bearing.

The SAV205 has not been made since 2004 so the machine is at least 4-5 years old, not 2.

Sorry I miss spoke instead of a couple of years old I should have said a few.
I'm aware of the age of the machine.

How much do you think an appliance repair tech would charge to replace the seal and tub bearing ?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #5 on: April 05, 2009, 09:03:07 AM »
I would guess between $125-$175 total labor. It would not hurt to call around on Monday and ask your locals what their rates are, now that you have an idea of what's involved.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline justinc25

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 17
Re: Maytag washer sounds like a plane taking off during spin cycle.
« Reply #6 on: April 05, 2009, 09:44:04 AM »
Thanks for the quick reply. I'll call around tomorrow, depending on the price I may have it done, or I may order the tools and tackle the job myself.



 

Whirlpool Cabrio washer sounds like a jet taking off in the spin cycle

Started by cindid

Replies: 4
Views: 5172
Last post August 13, 2013, 09:56:11 AM
by tgoods
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 1835
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 9398
Last post March 28, 2008, 09:18:30 AM
by PB3
Maytag LA8650 Washer - Grinding/Scraping/Rattle Noise During Spin Cycle

Started by Carol2

Replies: 17
Views: 7862
Last post April 02, 2009, 05:40:54 PM
by Carol2
maytag washer rubbing sound during spin cycle

Started by rasputins fingerbone

Replies: 4
Views: 2976
Last post March 26, 2009, 10:38:41 PM
by theoldstoveguy
maytag Atlantis washer timer switch doesn't activate spin cycle

Started by helpme805

Replies: 6
Views: 6059
Last post July 30, 2011, 08:35:12 PM
by AJ