Author Topic: Maytag washer mah4000aww spin cycle  (Read 2220 times)

Offline evo100

  • VIP Member
  • Member Since: Dec 2007
  • Posts: 3
Maytag washer mah4000aww spin cycle
« on: December 25, 2007, 12:34:19 PM »
Hello, Merry Christmas
I own the above and I have read the other threads. My R11 doesn't look burned. I flipped the board over it still looks fine. I would have to de-solder it to get an accurate reading. Now on the wax motor. I disconnected the wire and tested across the leads, it read OL open line. Is that the correct reading. My door lock light at first was working but after I took the washer lid and front off and put it back on the door lock light doesn't work. Could the wax motor go south without taking out R11 and Q6?
Thanks

Model mah4000aww

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9242
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Maytag washer mah4000aww spin cycle
« Reply #1 on: December 25, 2007, 09:41:02 PM »
Hi, 

This is what is says in the service manual.

Quote
Wax Motor Check - Door Lock
M e c h a n i s m
Check the wax motor for proper resistance.
This check should be made with the electrical
supply disconnected from the washer. Remove
the wire harness from the wax motor
terminals and place the ohm meter probes on
the terminals of the wax motor. The wax motor
should have a resistance of approximately
1900 ohms at room temperature.

Quote
Could the wax motor go south without taking out R11 and Q6?

Yes, if your lucky.

Merry Christmas,
Follow us on Google+ to see updates from our Google Drive and more!

 

Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 10508
Last post March 28, 2008, 09:18:30 AM
by PB3
Maytag Neptune MAH4000AWW burning smell during spin cycle.

Started by ksujason

Replies: 15
Views: 16422
Last post September 14, 2008, 11:46:31 PM
by Repair-man
Maytag LA8650 Washer - Grinding/Scraping/Rattle Noise During Spin Cycle

Started by Carol2

Replies: 17
Views: 8636
Last post April 02, 2009, 05:40:54 PM
by Carol2
maytag washer rubbing sound during spin cycle

Started by rasputins fingerbone

Replies: 4
Views: 3280
Last post March 26, 2009, 10:38:41 PM
by theoldstoveguy
Maytag washer sounds like a plane taking off during spin cycle.

Started by justinc25

Replies: 6
Views: 3711
Last post April 05, 2009, 09:44:04 AM
by justinc25
maytag Atlantis washer timer switch doesn't activate spin cycle

Started by helpme805

Replies: 6
Views: 6697
Last post July 30, 2011, 08:35:12 PM
by AJ