Author Topic: Maytag Range  (Read 2243 times)

Offline grannyx3

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 7
Maytag Range
« on: March 24, 2009, 07:49:32 PM »
My range has a F9 code + beeping.  I pressed CANCEL but the F9 + beeping returned.  I've unplugged & waited.  The oven door latch will NOT allowed the oven door to close.

The control panel is fine...clock works.  But, the oven door still will not close.

I really need help....thank you in advance.

Model MGR5770ADB


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Range
« Reply #1 on: March 24, 2009, 09:12:05 PM »
Granny check out this previous post about an F9 woe
http://appliancejunk.com/forums/index.php?topic=3090.msg11839#msg11839
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline grannyx3

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 7
Re: Maytag Range
« Reply #2 on: March 24, 2009, 10:44:51 PM »
Mr. Webster ~ I appreciate your reply. 

I'm more confused than before.  I plugged in the range...used the front burner to cook something to eat.

The oven door NOW opens & closes....NO F9 code or beeping....but the now the control is completely blank.  When I pressed the clock (to reset the time) .... all I get it the word OFF

I'm so confused.  What do you suggest???

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Range
« Reply #3 on: March 25, 2009, 12:07:05 AM »
reset the breaker
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline grannyx3

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 7
Re: Maytag Range
« Reply #4 on: March 25, 2009, 12:23:40 AM »
reset the breaker

Mr. Webster.  I did....still blank panel.  But, at least the oven door closes  :)

Thank you ...You've been helpful & patient and I appreciate it.  By any chance do you know any honest technicians in the Long Beach, CA area do you???? :-\

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Range
« Reply #5 on: March 25, 2009, 01:52:27 PM »
If the panel is blank then that is probably a loose power wire.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline grannyx3

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 7
Re: Maytag Range
« Reply #6 on: March 25, 2009, 01:58:23 PM »
Thank you for your help.  I've scheduled a service call for tomorrow 3/26.

I contacted a service company that was on a referral list sent by one of the technician on this site.  The company I chose was beyond helpful...and the owner actually listened to the problem beginning with the F9 code to the now blank panel.  He even called for verification that the clock was available.  Apparently, the clock is the brains of the range.

The owner is sending an technican out 3/26 to verify the problem is actually the clock.

You've been helpful & I appreciate it alot.  Have a great day!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Range
« Reply #7 on: March 25, 2009, 03:51:41 PM »
Quote
He even called for verification that the clock was available.

For what its worth the factory part number for your oven clock is, 74008102

You can enter the part number in the parts search box on the left to check the price.

Please keep us updated on how the repair goes with your new appliance repair technician.


 

Maytag Range - Does not heat

Started by AJ

Replies: 4
Views: 7875
Last post February 23, 2008, 04:58:52 PM
by AJ
Maytag Range no Oven Operation

Started by TechnicianBrian

Replies: 0
Views: 2143
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian
16010161 Maytag Gas and Electric Range Service Repair Manual

Started by AJ

Replies: 0
Views: 4896
Last post April 03, 2008, 09:54:39 PM
by AJ
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 4740
Last post June 14, 2008, 11:19:00 AM
by straycatt
Maytag Ceramic Cooktop Range digital control panel display is stuck

Started by wghman

Replies: 2
Views: 1958
Last post November 02, 2008, 07:39:21 AM
by wghman
Maytag Smooth Top Range burner issue

Started by mtgappdrh

Replies: 4
Views: 4964
Last post November 22, 2008, 09:21:40 AM
by JWWebster