Author Topic: amana waterpump wont come off  (Read 1135 times)

Offline hfd74

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 2
amana waterpump wont come off
« on: March 24, 2009, 07:49:39 PM »
ok  so   my belt  on this washer got  destroyed   and ive followed all the  directions for replacing this   but  my problem  is that the water pump will not come off the motor  i have removed the three torx screw  n thought it would jsut come apart thats how you all make it sound anyway  but alas  no  ive even tried to pry it apart  n  it is  stuck so bad that  it wont even pry apart  any suggestion  other than buy a new washer???

Model awa50aw

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: amana waterpump wont come off
« Reply #1 on: March 24, 2009, 09:34:18 PM »
That dang pump just typically does NOT want to come off there too easy. Get mean with it. Use some rust buster and let it soak a while.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: amana waterpump wont come off
« Reply #2 on: March 25, 2009, 07:52:28 AM »
Here's the skinny:

You ain't getting that pump off of there because when the old belt wore out, it also overheated the steel motor pulley and the shaft going into the pump. This literally bonds the plastic pump shaft to the steel motor shaft. You will have to order a new pump and chisel the old one off.

My guess is that if this machine was making a growling noise during the spin cycle before you noticed the broken belt, then you have much worse problems than a belt & pump. If this is indeed the case, drop what you are doing and go shopping for a new machine.
« Last Edit: March 25, 2009, 07:55:16 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline hfd74

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 2
Re: amana waterpump wont come off
« Reply #3 on: March 25, 2009, 09:36:46 AM »
thanks all that replied well  off to the store we go  i  totally  bent the motor belt pulley thing  by trying to pry  :)  oh well wife is happy gets to go shopping..........sigh

 

How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 27028
Last post April 19, 2010, 08:23:29 PM
by JWWebster
kenmore washer wont spin

Started by futch13

Replies: 5
Views: 3199
Last post October 09, 2007, 12:28:49 PM
by rickgburton
Water flowing in tub? SAV505DAWQ (made by Amana I believe)

Started by moruzzi

Replies: 1
Views: 1558
Last post October 09, 2007, 12:27:55 PM
by rickgburton
Help Tromm washing machine wont spin

Started by angeleyes

Replies: 15
Views: 18623
Last post February 13, 2008, 08:19:59 PM
by JWWebster
Amana washing machine LW4303W electrical damage.

Started by DMAN2501

Replies: 4
Views: 2692
Last post November 10, 2007, 01:14:38 PM
by DMAN2501
Amana Washer - Won't stop filling with water.

Started by AJ

Replies: 0
Views: 3184
Last post January 03, 2008, 08:46:14 PM
by AJ