Author Topic: Dishwasher runs 9 seoonds and shows cycle completed  (Read 2134 times)

Offline kalad

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 2
Dishwasher runs 9 seoonds and shows cycle completed
« on: March 17, 2009, 10:58:08 AM »
My Sears Kemore dishwasher will only run a few seconds and then shuts down with the cycle complete indicator light coming on.   When I choose the cycle from the touchpad, the cycle indicator light comes on but will not stay on.  Same with any options I choose. No time displays on the timer until I push the start button.  Then it shows the number 9.  The machine does start, but it counts down to 0 and the machine then shuts down and the cycle complete light comes on and stays on.  I can repeat that cycle over and over again.  I can't determine whether it is the touchpad, controller or timer?? I have disconnected the ribbon cable from the controller to the touch pad and cleaned it.  That did not help.  I also checked the other wiring and made sure connections were good.  No outward signs of component failures.  Your help would be appreciated.

Model 665.15919001

Offline kalad

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 2
Re: Dishwasher runs 9 seoonds and shows cycle completed
« Reply #1 on: March 19, 2009, 02:49:47 PM »
For the benefit of others who have read my post, the problem was the control board.  The timer and the touch panel were fine.  I purchased the control board locally through an independent appliance part dealer for $79.95.  I got a quick response on my issue from JustAnswer.com.  It cost me $15, but I got a response within 5 minutes and it was accurate.  Hope this helps someone else with a similar issue. 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9309
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Dishwasher runs 9 seoonds and shows cycle completed
« Reply #2 on: March 19, 2009, 03:06:42 PM »
Glad to hear you got it repaired.
Thanks for the updated.  O0

Quote
For the benefit of others who have read my post, the problem was the control board.

Cross Reference Information:

Control Board Factory Part Number: 8269187 subs to new part number, 8564542icon

click hereicon

Part Number 8564542 (AP3775964) replaces 8564542R, 8564543, 8269187, 8269187R, 8527685, 8527685R, 8528171, 8528171R, 8528172, 8528172R, 8528874, 8528874R, 8530909, 8530909R, 8534866, 8534866R, 8534867, 8534867R, 8534963, 8539379. 
 
Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and others.

Whirlpool also makes various appliance models for Sears / Kenmore.
 
Part Number 8564542 (AP3775964) is used with the following appliance models:

KUDC01TMBL6, KUDC01TMWH6, KUDI01DLBL6, KUDI01DLBS6, KUDI01DLBT6, KUDI01DLSS6, KUDI01DLWH6, KUDI01FLBL6, KUDI01FLBT6, KUDI01FLSS6, KUDI01FLWH6, KUDI01ILBL6, KUDI01ILBS6, KUDI01ILBT6, KUDI01ILWH6, KUDK01ILBS6, KUDL01ILBS6, KUDP01DLBL6, KUDP01DLBL7, KUDP01DLBS6, KUDP01DLBS7, KUDP01DLBT6, KUDP01DLBT7, KUDP01DLWH6, KUDP01DLWH7, KUDP01FLBL6, KUDP01FLBT6, KUDP01FLSS6, KUDP01FLWH6, KUDP01ILBL6, KUDP01ILBL7, KUDP01ILBS6, KUDP01ILBS7, KUDP01ILBT6, KUDP01ILBT7, KUDP01ILWH6, KUDP01ILWH7, KUDS01DLBL6, KUDS01DLBL7, KUDS01DLBT6, KUDS01DLBT7, KUDS01DLSP6, KUDS01DLSP7, KUDS01DLSS6, KUDS01DLSS7, KUDS01DLWH6, KUDS01DLWH7, KUDS01FLBL6, KUDS01FLBL7, KUDS01FLBT6, and more.

Check Priceicon
 
Hope you find our site helpful.

Follow us on Google+
 

GE Dishwasher Will not pump on wash cycle

Started by bp0611

Replies: 1
Views: 3440
Last post February 25, 2008, 07:38:59 AM
by apptech
Dishwasher recycle pump runs momentarily

Started by Handyman Rescue

Replies: 4
Views: 2605
Last post May 09, 2008, 11:34:57 PM
by AJ
Whirlpool dishwasher runs great, but door leaks like crazy

Started by Aaronbond1973

Replies: 38
Views: 36934
Last post August 04, 2013, 12:11:43 PM
by yogifredbrown
Dishwasher stops mid cycle

Started by madgearooch

Replies: 5
Views: 21130
Last post October 20, 2008, 05:11:30 PM
by Repair-man
Frigidaire Dishwasher wont run normal cycle

Started by t-bone

Replies: 1
Views: 2860
Last post October 23, 2008, 06:58:19 AM
by Repair-man
KitchenAid Dishwasher hangs during wash cycle at 82 minutes mark

Started by tro

Replies: 1
Views: 2156
Last post November 15, 2008, 03:00:38 PM
by Repair-man