Hello, actually I would like not only the service manual, but also the schematics to both boards, and the wiring diagram of the entire oven assy. Realistically that is not likely from my searches so far. Here's the whole story, and maybe you can suggest the next step. The clock display gradually went dimmer and dimmer over about 6 years, but everything continued to work just fine. Not wanting to spend $150 on a new clock assy, we have worked fine for 4 years not seeing the control functions. Recently my daughter thought she should operate the clean cycle, and then the oven stopped working properly. It will go into a constant beeping mode, turn the heat on for about 5 minutes and then quit heating. It does continue beeping however. I checked the sensor probe and it is almost exactly 1100 ohms at 75 degrees. Since the display is not working I do not know if any error code was thrown. Open to suggestions. Thanks, Bill Dukes
